Enigma 2 by The_ripper - TEST -

Printable View

Show 40 post(s) from this thread on one page

27-10-2010, 03:55 PM
revoxs

Quote:

Originally Posted by sattommy

You can install e2 on usb. However you will need to change kernel (only kernel, takes 30 seconds) with azup eveytime you want to switch,.

If people are interested i can post a howto.

That would be nice.
When sound an DVB-C is working I will not use Opensh.. anymore :winner-019:
27-10-2010, 04:00 PM
espac

Yes, yes-I to waiting for DVB-T drivers, than I join E2.
27-10-2010, 04:03 PM
jamesjay

Quote:

Originally Posted by zfeet

I haven't reverted back to Opensat's firmware as I am still playing with E2. The process from Opensat to E2 went without any problems so I don't see any problems that would prevent from going back to Opensat.

I noticed one problem: the fan isn't on when using E2 so the device gets quite hot.

Cheers M8,

Theres no fan on the Premium or Elite so this could be why it isn't working after you loaded this version of E2...will probably load it tomorrow after work have a play and try to revert back, hopefully if any of the E2 team read this before I do it they'll tell me if I shouldn't.

Thanks for your reply
James.
27-10-2010, 04:32 PM
sattommy

Quote:

Originally Posted by gadgeteer

.mts and m2ts format can't be recognized by the media player. I can't see my clip recorded from my camcorder.

They dont show up in the list? Or it gives an error?

Could you provide me with a sample, havent don any work on m2ts yet.
27-10-2010, 04:39 PM
deki20

.m2ts is bluray format...

pls, try this format...it would be great....

tnx.....
27-10-2010, 04:43 PM
tsakman

Quote:

Originally Posted by sattommy

They dont show up in the list? Or it gives an error?

Could you provide me with a sample, havent don any work on m2ts yet.

http://stfcc.org/misc/jessejames.clip.m2ts

i found this.Dont know if you need bigger sample

or this

http://megaupload.com/?d=M35VFQ73
27-10-2010, 05:06 PM
gadgeteer

Quote:

Originally Posted by sattommy

They dont show up in the list? Or it gives an error?

Could you provide me with a sample, havent don any work on m2ts yet.

They don't show up in the list. Please check pm, I already upload a clip to you.

Thanks.......:respect-061:
27-10-2010, 05:20 PM
hfmls

1)
wow i really CAN'T play any .srt subtitle at all!
EDIT: it started working after like 1 or 2 minutes? :S why did it took so long? should have start early, after movie problems start to appear subtitles just stop appearing.

2)
some .avi and .srt appear listed when i press AUX.
other's won't. why? :S

3)
in mkv if i try to play internal or external .srt they appear in AUX menu, but after i chose i see nothing at all.

4)btw: i was testing with samples of 15..20 seconds high bitrates. now that i test full movies i noticed too after 1 or 2 minutes, sound losses and some problems.
my test was with a simple xvid,avi 700mb
Something is wrong sattommy. Audio disappears and image starts to play like at 150 FPS (slow motion or so!) But i think it is framedrops.
27-10-2010, 05:22 PM
naveh

Quote:

Originally Posted by zfeet

I noticed one problem: the fan isn't on when using E2 so the device gets quite hot.

can someone confirm this issue.
27-10-2010, 05:27 PM
zfeet

Quote:

Originally Posted by sattommy

Still working on dvd menu playback, but this one it annoying ;-)

Have you implemented dvd decrypting? The possibility of watching commercial dvd's would mean I could replace all of the devices in the livingroom with Azbox.
27-10-2010, 05:51 PM
MoGaZz

Quote:

Originally Posted by sattommy

Hello

Which codecs are used within the MKVs? h264 for now is the only one working with mkv. I need samples of others

Have you managed to get some samples? Let me know if you haven't. I can arrange some mkvs with h24, xvid and mpeg2 for you.
27-10-2010, 05:57 PM
mounirmoune12

My azbox don all the steps but my problem is azup error

(file not foond unable to complete rquest). i tried all fw, unstall and install azup and used tow usb stick one formated fat 32 and one ntcs , windows vesta and xp.
nothing work and i dont know what to do .3 days no tv so far

pls help

:drool5::drool5::drool5:
27-10-2010, 05:58 PM
revoxs

Why not opening a new thread about multimedia and howto an not howto ?
I'm beginning to get a bit confused.
27-10-2010, 06:09 PM
Cirio

My litle experience with MKV Player.

I play mainly USA tv show @720p (the usual release you find in internet like "DIMENSION").

I just finished watch NCIS and NCIS LA with subtitles (from usb HDD) and i have to tell the player worked like a charm. Not a single freeze in 1,5 hours of continuos play.
Subtitles worked well too, some lines are not displayed (rarely).

So for my use this release is very good!

Main problem now is to share my PC folder as i used to with opensh!t firmware.

Just my 2 cents!
27-10-2010, 06:09 PM
jamesjay

Quote:

Originally Posted by naveh

can someone confirm this issue.

There's no need at the moment because Zfeet is using a Premium plus with the AZ E2 designed for the Premium and Elite which as no fan, when a Premium plus version of E2 is released for testing and if the fan is not working then it becomes an issue.
27-10-2010, 06:15 PM
Smudger

Quote:

Originally Posted by sattommy

You can install e2 on usb. However you will need to change kernel (only kernel, takes 30 seconds) with azup eveytime you want to switch,.

If people are interested i can post a howto.

In a new thread please.
27-10-2010, 06:19 PM
giallo

Quote:

Originally Posted by Smudger

In a new thread please.

YES, it's very interesting ...
27-10-2010, 06:30 PM
zfeet

Quote:

Originally Posted by mounirmoune12

My azbox don all the steps but my problem is azup error

(file not foond unable to complete rquest). i tried all fw, unstall and install azup and used tow usb stick one formated fat 32 and one ntcs , windows vesta and xp.
nothing work and i dont know what to do .3 days no tv so far

pls help

:drool5::drool5::drool5:

I had the same issue when Azup was installed in the default location in Program Files. Copy AZUp.exe from "C:\Program Files\telesat\AZUp" to a different location and run as Administrator.
27-10-2010, 06:31 PM
sattommy

Quote:

Originally Posted by hfmls

1)
wow i really CAN'T play any .srt subtitle at all!
EDIT: it started working after like 1 or 2 minutes? :S why did it took so long? should have start early, after movie problems start to appear subtitles just stop appearing.

2)
some .avi and .srt appear listed when i press AUX.
other's won't. why? :S

3)
in mkv if i try to play internal or external .srt they appear in AUX menu, but after i chose i see nothing at all.

4)btw: i was testing with samples of 15..20 seconds high bitrates. now that i test full movies i noticed too after 1 or 2 minutes, sound losses and some problems.
my test was with a simple xvid,avi 700mb
Something is wrong sattommy. Audio disappears and image starts to play like at 150 FPS (slow motion or so!) But i think it is framedrops.

Framedrops on this 700mb avi you mean? I have watched some mkv series and it worked very well.

If i have time i will test some longer avis etc.....

Dont expect perfect playback right away please ;-)

@zfeet

i think there is a css library as well, but first menus.

@cirio

You can add lines to mount in a startup script. Just mount it to /media/hdd And hdd will show in mediaplayer
27-10-2010, 06:51 PM
Cirio

Quote:

Originally Posted by sattommy

@cirio

You can add lines to mount in a startup script. Just mount it to /media/hdd And hdd will show in mediaplayer

Yes, i have usb HDD mounted in /media/hdd
I cannot mount my pc HD, i edited smb.conf but nothing happens.
I tried to manually mount the disk with cifs but all i got is "invalid argument"
I tried nfs mount but nothing happens (probably because i have win7 Home premium and nfs is not supported)

Any hints?

:banghead:

Show 40 post(s) from this thread on one page