Help needed with Smargo

Hello:respect-055:

i've just took delivery of a Smargo cardreader i'm trying to get a uk sub to work and i dont know even where to begin.

i'm running Gemini 3.90 i've found some files for a nabilo image and installed them, there's a green led on the smargo (not sure what way round the card goes) atm i've got chip down.

the usb reader is not listed under Devices 'cos i guess it has to be mounted.

and that's it i'm totally stuck:o15:can someone help me please.

Oh yeah forgot i've got CCcam2.0.5+newcs1.62

thanks & regards: canthackit

Add this line to your CCcam.cfg


SERIAL READER : /dev/ttyUSB0 smartreader+


Let me know how it goes

on gemini theres a option on blue panel (not sure now dont use gemini for long time) to mount MOUNT MANAGER that has the smargo drivers u need to mount them and also do as SONIC1 says

ok guy's thanks, and here goes.

regards: canthackit

no nothing gents.

i amended the SERIAL READER line.

i've removed the memory stick, but there is still the internal HDD installed and it's only that that is listed in DEVICE MANAGER no smargo.

i was wondering if i need to upgrade the firmware, but then again i need to know how to do that under windows.

regards: canthackit

Not sure but as you are testing try Oozoon Full image as I am sure this has drivers built in.

no mate i'm not, i've changed again:biggrinjester:

i've now got Gemini 3.90 on the flash, nothing mutiboot.

regards:canthackit

@sonic1
i've found another tut that it says the serial reader line is /dev/tts and yours says /dev/tty do you know for sure which is correct?

i've managed to check the firmware luckily enough it's v1.3 i've got the reader plugged into the DB gone into kernal/modules> and selected (chipset FTDI) saved it and rebooted many times still nothing.

i'm at a loss altogether now.

regards: canthackit

on USB1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1

on USB0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0

Well spotted m8 ignore my first post.
The reason I say try Oozoon is because I am 99% sure it has the drivers you need built in.

it's there i have another problem no matter what latest cvs image i put on the flash i can never get any of the latest images on multiboot they just dont seem to want to work with BA.

so it's got to be the flash, as i say i've got Gemini atm i'll probaly install BH v0.5

regards: canthackit

Smargo Driver for Nabilo BlackHole & DB800 (Nabilosat E2)

This lib file pack is manual install in the your db 800
or
ftp to tmp the nab.gz file and install via manual addons

Restart Enigma2

Edit the file bootup in the folder /ect/init.d

you add:

echo 90 > /proc/progress
modprobe ftdi_sio

or over write the bootup file I have added from Nabilo BH 0.7

Set the cccam.cfg :

SERIAL READER : /dev/usb/tts/0 smartreader+

SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 XXX0000

SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 6800000 [ Tested and working on UK NDS ]

These work for the top USB slot

Thanks to ^^corrado^^

done all that apart from the clock speed, below is an excerpt from the CCcam.cfg file:

# Smartcard clock speed override
# Setting override specified speed for smartcard.
# Don't add setting unless you're sure what you're doing.
# In 99% of the cases the reader selects the optimal speed.
# Adding this setting either slows your card down, or might destroy it.

so because of that i aint gonna mess with it, but i still aint got nuffink.

regards: canthackit

I overclock my card to 5300000 but if you want to be safe start lower such as 3500000, I have tested up to 6200000 but she gets a little hot:18:

Trust me start low, work up and keep a close eye.

of course i trust you mate:iagree:

let me see.

regards: canthackit

Smargo Driver for Nabilo BlackHole & DB800 (Nabilosat E2)

This pack is manual install in the your db 800

Restart Enigma2

Edit the file bootup in the folder /ect/init.d

you add:

echo 90 > /proc/progress
modprobe ftdi_sio


Set the cccam.cfg :

SERIAL READER : /dev/usb/tts/0 smartreader+

SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 XXX0000


Thanks to ^^corrado^^
Attached Files lib.rar (40.2 KB, 8 views)


hi to all , i have followed above instruction after rebooting it get stuck on boot up, it do't go futher .only way to restart it , i have to reanstall new image from begining. i have tried atleats 4 time and all the time resoult will be same. any one can advice me wher i'm going wrong.
thanx

Id like some help with a smargo I have done what is in this post and nothing how do I check the firmware
All the best Dean.

Have you added the driver from post 11 Dean ?
If yes have you set the correct attributes ?

No I haven’t is it just attributes 755 for this file ftdi_sio.ko
Thanks Sonic
All the best Dean.

Here is the file to install via addons, ftp to tmp and carry out manual install.
Extract my file and inside the folder in the nab.gz

Still nothing don’t know what I am doing wrong can I have a copy of your Cccam config with your bits taken out
All the best Dean.