Printable View
I have a big problem when I use Enigma 2
I have Premium+ with tuner model conexant-cx24116
I did many things and still no signal or channels on enigma 2 images
is the tuner model conexant-cx24116 old ver and not working with Enigma 2 ?
I do not know and I need your help friends
Hi!
Could you please give us some more information;
What is your dish setup?
Do you use switch (if so what protocol does it follow (1.0, 1.1, 2.0) and how many LNB's do you have connected)?
Do you use a motor (if so what protocol does it follow (1.2, 1.3 (USALS))?
What satellite are you pointed toward (and what connection on the switch (A, B, 1, 2, 3, 4, ...))?
What settings have you altered in Enigma2 (how have you done your setup)?
What was your settings in the Original OpenSat firmware? Did everything work ok in OFW?
With more information I'm sure we can help you.
Best regards!
I have one lnb and motorized dish.
I have normal posiontner with 24 inch motor and 2.4 dish with single lnb and I'm using direct connection not a switch
about your question my stup
I do not have switch and I did this steps :
Menu-->Setup--->Service Searching-->Tuner configuration-->OK
in sub menu "Configuration Mode" choose "Simple"
Then in "Mode" sud menu choose positioner and set up my details there
Yes,On Enigma1 OFW is working fine on my Azbox
thanks for your help
rem:
pls tell me what your tuner type you have in your Azbox ?
mine Conexant CX24116
best regards
Best recommendation you could get is to stay with the original firmware, E2 isn't that stable yet. You don't want to use it for everyday use.
BTW we are not blind, why use the large font?
Thanks mr T33 for your advice
you are right the original firmware is stable more than E2 but, im the future I think E2'll be too much better now
cuse I like the E2 cuse I have dream box 7000 and relook 400 with E2
is your tuner Conexant CX24116 or what ?
I do not mean it, sorry about my larg font
No problem. Yes, E2 may be the future but until then wait...
Yes mr T33
but I need to know
if my Azbox tuner Conexant CX24116 old ver and do not work with E2 I can retrun it and have another one with a different tuner model
my Azbox can't configure any Satellite Ch's
from Hisoasat 30.0 W to 42 E
it's like I do not have tuner or lnb
You understand me ?
Premium+ cant have cx24116 chip !!!
It is based on STV chip ( DVB-S2 Tuner in Premium+ ) !!!
thanks for your replay Mr MickeySa
I'm sure that my tuner type is Conexant CX24116
pls look at to this links and look at this part ( DVB-S/S2 Tuner Specifications )
http://www.gofastmotorsports.com/azpremiumhd.htm
http://cidaderiodejaneiro.olx.com.br...-iid-114146150
You'll see:
DVB-S/S2 Tuner Specifications
Input Frequency: 950 ~ 2150Mhz
Modulation: QPSK, 8PSK
FEC: 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 6/7, 7/8, 8/9,
9/10
Demodulation IC: CX24116
Input Impedence: 75O
IF Frequency: 36.128Mhz
also look at this link
http://www.sharpsme.com/Page.aspx/eu...a-9eed20b4a70a
and when download E2 to my Ezbox
I saw that my tuner Azbox is Conexant CX24116
what is your tuner Azbox type ?
and why Premium+ cant have cx24116 chip ??
When you get E2 on relook 400 s?????
I've looked at the links these are Premium HD not plus +.Quote:
Originally Posted by Egyptian11
So it looks like your Azbox is a Premium Hd like mine.