How to flash Vu+ Solo with USB Pen Drive

When you download a new USB image file you may find the folder names in the ZIP/RAR archive are incorrectly labeled.

So what you need to do is make a folder on your USB pen drive called vuplus

Then inside the vuplus folder you make another folder called solo

So now you should have a folder in on your PEN drive root like this

vuplus/solo

Copy the following USB Image files from the ZIP/RAR achive to the vuplus/solo folder on your PEN Drive.

boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2

Power Off Solo
Insert USB Pen Drive in the front USB socket.
Power on Solo

The display window will show an orange/red LED constantly lit.
This means it's reading the data from the USB Pen into the buffer.

Then...

The display window will show the orange/red LED flashing.
This means it's now flashing the data to the receiver.

Wait until the LED changes to a Green Flashing LED.

When Green LED is flashing you can now safely power off the receiver and remove the USB Pen Drive.

Now Power on and wait for the receiver to boot.

Dear hda5,brother your explanation is good and clear.After many searching this only help me set up my VU+solo box.Thanks a lot.

I tried this and once its flashed green and i start the box up...all that comes up is a blank screen. can you help

Where can I find boot_cfe_auto.jffs2, kernel_cfe_auto.bin, root_cfe_auto.jffs2?

Quote:

---

Originally Posted by york99

Where can I find boot_cfe_auto.jffs2, kernel_cfe_auto.bin, root_cfe_auto.jffs2?

---

check the firmware sections for the image you want to load and download the zip or rar file and unpack it on your laptop or pc