Results 1 to 12 of 12

Thread: tm 9100 spec & FAQ thread

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Location
    North West U.K.
    Posts
    12,916
    Thanks
    3
    Thanked 6 Times in 1 Post
    Q:- and does it have an rf channel out ? (21 to 69)
    or can it only be connected by rgb , composite and ypbr ?
    quote

    * Video Out: RGB, CVBS, S-Video & YPbPr

    A:_ It has rf in and rf out.
    and It has a uhf modulator that is preset at 36, you do have a menu in setup to alter it if you so desire.



    Q:- can this box do BLIND SCANS ?

    A:- No.



    Q:- what cable is required? straight through or cross over cable?

    A:- straight cable into a router , crossover cable into a pc


    Q:- How to do a hard reset ?

    A:- hold down the up button on the front of the box while powering up , a new menu will appear , push right on hard reset




    some info from elsewhere for u

    1) how big a harddrive can u install - up to 1 tb ( 1 terabyte ) ide , ata or pata , preferably 5400 for quietness !

    2) is the pic quality good as dreambox ?

    3) are the menus better than the technomate 1500ci ?
    i would have thought thats image dependent ?.

    4) can it use dreambox images as stated on some sites ? - no it cant ( yet )

    5) anyone know where their are some good pics of the menus and system etc. ?

    6) oh what about patches ? - I dont think it uses patches

    7) can it use cams and cards ? - yes it can


    ********************************* *******************************

    PREMIERE

    For the Video On demand channels
    select Premier Direct, Premier Sport Portal or Erotik,
    then press Yellow ( or Green or Red ) button & select the sub channel.

    note , the colour button varies depending on the image used

  2. #2
    Senior Member
    Join Date
    Dec 2004
    Posts
    167
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by echelon View Post
    2) is the pic quality good as dreambox ?

    3) are the menus better than the technomate 1500ci ?
    2) Compares to my Humax PVR which is pretty good.

    3) Fairly complex menu's.
    There is a lot to master, but rewarding when you do.
    Once set up its not too bad selecting channels.
    You can have as many favourite lists as you like
    Setting an advanced recording is a nightmare. Still to investigate an EPG plugin that might help?

  3. #3
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Location
    North West U.K.
    Posts
    12,916
    Thanks
    3
    Thanked 6 Times in 1 Post
    Does anyone know how much memory it has?

    Quote Originally Posted by zdrax View Post
    Does anyone know how much memory it has?
    Memory for what?

    Memory is unlimited as far as number of channels is concerned, just the same as my Dreambox 7000.
    I have 13,000 channels in my TM-9100.

    Quote Originally Posted by zad View Post
    if i remember rightly 16meg ram 64 meg flash.
    it was printed on the side of the box but i have put mine up in the loft now so i cant check
    just checked the box and its the other way round m8

    16 meg flash and 64 meg ram

Similar Threads

  1. warnings on the 9100 super
    By garymaule in forum 500/600/9100 series
    Replies: 4
    Last Post: 18-05-2008, 04:07 PM
  2. Anyone using the 9100 & a positioner
    By catseye in forum 500/600/9100 series
    Replies: 8
    Last Post: 16-06-2007, 08:43 PM
  3. Instalation Guide.
    By peggle in forum 500/600/9100 series
    Replies: 4
    Last Post: 05-06-2007, 03:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •