Results 1 to 19 of 19

Thread: Setting up WLAN for VIX on a Vu Uno

  1. #1
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Setting up WLAN for VIX on a Vu Uno

    Hi

    I have a Vu Uno. I am trying to get my box two work with a VIX image and WLAN. I have flashed the box with the VIX imange (tried oler versions as well) but the WIFI dongle is not being picked up.

    I am not able to connect to a LAN to download any other drivers.

    I know the dongle works as I can get it set up with the OpnePli image. Have to flash restart and WLAN option comes up. Straight out the box! The WLAN driver appears to be rt2800usb?

    Does anyone have any suggestions? Its so simple on the OpenPli but I want the VIX image.

    Is it possible to install the drivers from a usb stick? If so how? Should the VIX image recognise the dongle if the PLi does?

    Most importantly where can I get the WLAN driver for the VU? Probably the rt2800usb.

    Look forward to hearing back from you. Thank you for your help in advance.

  2. #2
    Cool Dude ^^COMPASS^^'s Avatar
    Join Date
    Dec 2004
    Location
    Vu+UNO [ViX-3.0-558-Build CCcam MGcamd][with keys][SpiderBox HD & SD]
    Posts
    1,963
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Here are the Drivers You have requested for your VUUNO :respect-055:

    they were obtained from the VIX feeds

    Using the following command on my VUUNO
    Code:
    opkg download enigma2-plugin-drivers-network-usb-rt2800


    Unzip and place enigma2-plugin-drivers-network-usb-rt2800_1.0-r1_all.ipk onto a usb stick pop the stick your uno and follow onscreen instructions
    Attached Files Attached Files
    Last edited by ^^COMPASS^^; 28-01-2014 at 09:11 AM.

  3. #3
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    You are a star. Will give this a go. Many thanks

  4. #4
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi Compass,

    Installed the ipk, restarted the box with the wifi dongle in but still not getting the wlan. :001_07: It just shows lan. Any ideas?

    Do you know of a VIX image which has the wlan driver already loaded?

    Cant understand why this is such a pain when everything else work so well on the VIX.

    Many thanks

  5. #5
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have posted on there as well, but no joy. Cant believe I am the first one to have this issue.

  6. #6
    Cool Dude ^^COMPASS^^'s Avatar
    Join Date
    Dec 2004
    Location
    Vu+UNO [ViX-3.0-558-Build CCcam MGcamd][with keys][SpiderBox HD & SD]
    Posts
    1,963
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Did you Do a full Restart ?

  7. #7
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Yes mate, did a full restart with the power button on the back.

    Can you tell me what the rt2800usb is classed as. Is it a plugin, extension or driver?

    Going to try different versions. If its worth doing that?

    Or can I try anything else.

  8. #8
    Super Moderator DCG's Avatar
    Join Date
    Dec 2004
    Location
    just above the earth
    Posts
    1,622
    Thanks
    0
    Thanked 0 Times in 0 Posts
    you asked for a driver post 2 gives as you requested

  9. #9
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Appreciate that mate, but the subcategory in this and most other folders dont have a anything called Drivers which is why I asked the question. Sorry if it was a silly thing to ask.

  10. #10
    Super Moderator DCG's Avatar
    Join Date
    Dec 2004
    Location
    just above the earth
    Posts
    1,622
    Thanks
    0
    Thanked 0 Times in 0 Posts
    as you have this problem with vix
    and all is ok with pli
    why struggle with vix
    it might be a dongle driver issue with vix

    have you tried ant othere images with it

  11. #11
    Super Moderator nml's Avatar
    Join Date
    Dec 2004
    Location
    UK & Spain
    Posts
    1,502
    Thanks
    10
    Thanked 5 Times in 1 Post
    Did you try the telnet command mentioned by compass?

    opkg download enigma2-plugin-drivers-network-usb-rt2800

    NMl

  12. #12
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I Just followed the instruction below

    Unzip and place enigma2-plugin-drivers-network-usb-rt2800_1.0-r1_all.ipk onto a usb stick pop the stick your uno and follow onscreen instructions

    I thought the first part what where I said you would find the driver if you need it again in furure:blush5::blush5::blush5:

  13. #13
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Well f*ck me. Just tried the VIX 2.4 build 165 (link below) is it works with the WLAN without any downloads or anything needed like the Pli image :respect-044:

    https://www.satpimps.co.uk/showthrea...2-4-15-05-2012

    Thank for your help guys.

  14. #14
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Got connected to the plugins connection but dont see autoboutique on there. Does this mean the 2.4 has different listing for its plugins in the latest version 3 image? I tough the plugins just connect to a same server no matter which version of vix you use?

    Kind regards

  15. #15
    Cool Dude ^^COMPASS^^'s Avatar
    Join Date
    Dec 2004
    Location
    Vu+UNO [ViX-3.0-558-Build CCcam MGcamd][with keys][SpiderBox HD & SD]
    Posts
    1,963
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Amar786, here is VIX3.0 Build 806 with WLAN driver rt2800usb
    installed for you

    you will need to setup, as you would with any new VIX Build

    hope it all goes well fella
    Attached Images Attached Images
    Attached Files Attached Files

  16. #16
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Campass, hat off to you sir. That worked a treat. Very happy. :respect-055:

  17. #17
    Cool Dude ^^COMPASS^^'s Avatar
    Join Date
    Dec 2004
    Location
    Vu+UNO [ViX-3.0-558-Build CCcam MGcamd][with keys][SpiderBox HD & SD]
    Posts
    1,963
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Pleased it worked out fine for you Amar :champion-018:

  18. #18
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have a VIX image with the rt2800usb drivers on it. Is it possible to ftp these from the box and then copy them into the new image? Does anyone know which folder the driver would be saved in?

    Many thanks

  19. #19
    Member
    Join Date
    Jan 2012
    Posts
    40
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Does anyone have the ipk driver "usbserial (1.0-r1) file for a Vu Uno. Would really appreciate it if you can upload this.

Similar Threads

  1. Wlan plugin
    By Kici in forum AzBox HD E2 Plugins
    Replies: 0
    Last Post: 22-09-2011, 03:31 PM
  2. Wlan possible with Spider??
    By ceyer in forum SpiderBox 9000 HD
    Replies: 7
    Last Post: 04-05-2010, 01:05 AM
  3. WLAN module down
    By geezerpl in forum AZBox HD Newbie Questions
    Replies: 9
    Last Post: 10-08-2009, 06:45 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •