Originally Posted by
Mickha
Hi turbospud,
as you are getting a signal, from other frequencies, on both polarities, then your LNB seems to be working.
You have provided limited information, regarding your general location, 56.5N.
Can you please check your Latitude, and longitude, on dishpointer.com, as your signal readings seem low, considering you are using a 1.2M dish, but this depends on your general location.
As you have added a new receiver you might want to re-align your dish/motor, by sending the motor to zero and starting from scratch.
If using USALS then send your dish to your nearest, available, true south satellite, this equates to your longitude reading, a negative reading = West, positive = East, e.g. a longitude of -1.876 is approximately 1.9W which would make Thor at 1W a reasonable satellite to align your dish to.
As you have a 1.2M dish are you using a 36V motor?
Can you please check other frequencies, to see if you are experiencing any problems, including 2 FTA channels:
TV Disco, 13E, 11642 H 27500 and Sport 1 Germany, 19.2E, 12480 V 27500
I could understand the problem if it was most channels, on one polarity, as this could be a loose connection, water ingress, or a failing LNB, but as it seems to be only 1 frequency this points more to a faulty channel list and might be fixed by simply deleting the channel and manually re-scanning it in.
Bookmarks