new 733p patch

[fman]

Update

Just loaded the softcam posted by Echelon, and hey presto, Bulsat open.
I tried all your suggestions previously, but to no avail, so must have been something to do with the key file.
Thanks for all your input guys
Fman

[holmroad]

Are the Dutch channels still open with 733? Keys have changed and 732 not opening them. just want to know if it's worthwhile before I change to this patch. Thanks.

Yes mate, patch 733P plus latest softcam opens Bulsat (39E) AND the C+ N/L channels (19E)!
Plus many others of course too!:respect-067:

[holmroad]

Just found there's a new softcam this morning, with new C+ N/L keys on it guys!:respect-067:

[martin007]

https://www.satpimps.co.uk/showthread.php?t=111145

[titus]

also just noticed that there are some channels (kable deutchland ones) on 23.5e that are open as well. (not sure if that has been said)

[Sathappy]

If you want to know where to find the patch 733p, just send me a PM here...

[Sathappy]

Yes mate, patch 733P plus latest softcam opens Bulsat (39E) AND the C+ N/L channels (19E)!
Plus many others of course too!:respect-067:

Which others on Astra & Hotbird ?

[satman10_0]

Which others on Astra & Hotbird ?

This question has already been answered and a link was provided by bozoth on page 2 # 37

https://www.satpimps.co.uk/showthrea...=143603&page=2

[satman10_0]

This is all EXACTLY what I was saying earlier in this thread guys - my TM6900HD Super totally froze after loading patch 733P - before I had chance to load the Add-On and softcam - my box usually reboots itself after both the USB patch load AND the Add-On phase - but NOT with patch 733P!
I also posted earlier how I had to switch my box off at the mains to reboot it - all of which has NEVER been necessary with previous patches!:respect-055:

Just want to to say that your noted observation with regards to the required manual reboot was helpful as it aliviated any panic..
During my update, the 733 Patch required a manual reboot, but the Add-on did re-boot automatically.

[holmroad]

Just want to to say that your noted observation with regards to the required manual reboot was helpful as it aliviated any panic..
During my update, the 733 Patch required a manual reboot, but the Add-on did re-boot automatically.

Cheers mate - we are all here to help each other, on this brilliant forum - and feedback is just as important for our mutual benefit!
Thanks for your feedback!:king-041:

[Learning]

film 1.1 1.3 dont open for me for some reason have I missed something?

[holmroad]

film 1.1 1.3 dont open for me for some reason have I missed something?

Its moved to 23.5E in Seca encryption mate!:respect-055:

[Learning]

Ta m8 the ba..........

[bamber]

I had been running my TM6800HD Super on 688p and using a Diablo 2, but I got fed up of Bulsat freezing for a few seconds every 15-20 minutes when the CAM was warm, so I decided to upgrade to the latest patch.

I have installed 733p, ADD_ON_002p and the latest softcam. Without the CAM in the receiver, TNT and C+NL work fine, but Bulsat freezes momentarily every few seconds. Does anyone know why that may be? Signal strength is 75%.

If I insert the Diablo 2 CAM, that seems to take over the decryption and the picture is stable for 15-20 minutes then freezes for a few seconds, as before.

[holmroad]

I had been running my TM6800HD Super on 688p and using a Diablo 2, but I got fed up of Bulsat freezing for a few seconds every 15-20 minutes when the CAM was warm, so I decided to upgrade to the latest patch.

I have installed 733p, ADD_ON_002p and the latest softcam. Without the CAM in the receiver, TNT and C+NL work fine, but Bulsat freezes momentarily every few seconds. Does anyone know why that may be? Signal strength is 75%.

If I insert the Diablo 2 CAM, that seems to take over the decryption and the picture is stable for 15-20 minutes then freezes for a few seconds, as before.

You are quite correct mate - I also get occasional glitches (picture breakup/ freezes) on Bulsat when using patch/softcam version, yet with G a m m a card I get absolutely NO glitches!
Odd eh?:king-042:

[DJ2004]

Hey Guys!

I´ve noticed something strange with the latest patch, maybe it has been impemented in previos patches as well but I didn´t notice it?
Well when I put an USB pendrive into the front USB port my technomate does automatically start recording in the background. This doesn´t work with my hdd.
Thus I can rewind anything I´m watching on TV but after a while a message appears that the memory is full.
Is it normal with this kind of recording?? Can it be turned off in a way?

Cheers,
DJ

[holmroad]

One thing I've noticed on 733P is that when viewing PVR recorded progs it no longer goes back to the start every time after stopping it!:respect-067:

[Tmull]

Is this patch good for both the 6900 and 6800 non super boxes? TMULL

[thijs]

Hey Guys!

I´ve noticed something strange with the latest patch, maybe it has been impemented in previos patches as well but I didn´t notice it?
Well when I put an USB pendrive into the front USB port my technomate does automatically start recording in the background. This doesn´t work with my hdd.
Thus I can rewind anything I´m watching on TV but after a while a message appears that the memory is full.
Is it normal with this kind of recording?? Can it be turned off in a way?

Cheers,
DJ

yes mate
go into your disk manager menu and turn auto time shift off

[holmroad]

Is this patch good for both the 6900 and 6800 non super boxes? TMULL

Think the answer is 'yes' mate, there IS one, but its patch 702P below!:respect-050:


https://www.satpimps.co.uk/showthrea...499#post769499