Cilquer/SBCL Freeze Problems On JSC.

[gibson]

Should have maybe started a new topic instead of tagging a previous post, so here goes. On my Technomate 1500 I'm able to clear using the Compass Cilquer kindly donated method, but the picture is very intermittent and prone to freeze/drop out.
Is there any settings I should be adjusting in SBLC v1.0i or Cilquer to achieve stability?
Thanks in anticipation.

Best wishes from,

Gibson.

[Giga]

with [Alt] [Tab] you can cycle trough the windows boxes that are open. Check Cilquer response timings if these are over 1000 ms, it is the internet connection to and from server.

[gibson]

Hi Giga thanks for the reply. Not sure what you mean by hitting the Alt key to find response times. Could you give me a bit more detail on where to point this. Also noticed that now on SBLC v1.0i it s showing detached. Thanks again.

Best wishes from,

Gibson.

[Giga]

press down [Alt] keep pressed down, hit [Tab]: this cycles trough your open windows. When you have Cilquer ici.exe open, black background with white text and an open channel you see lines with : open (495 ms) as long as these are below 1000 ms you should not have freezes. If these go above you see freezes, there is nothing you can do.