Results 1 to 2 of 2

Thread: EDG-NEMESIS 4.4 for TM9100/TM9100-SUPER

  1. #1
    V.I.P.
    Join Date
    Dec 2004
    Posts
    1,645
    Thanks
    0
    Thanked 4 Times in 4 Posts

    EDG-NEMESIS 4.4 for TM9100/TM9100-SUPER

    EDG-NEMESIS 4.4 for TM9100-SUPER


    *** NEWS: Update firmware on Internet for a future release !!!***
    *** (GREAT FEATURES ONLY by EDG-NEMESIS TEAM !!!) ***


    Technical Infos:

    * based on rel 2.0.18
    * NEW DRIVERS by EDG-NEMESIS TEAM ( for many features ! )
    * u-boot 1.1.2
    * Linux version 2.6.9
    * Web Interface: 6.0.4-Expert
    * Busybox 1.01
    * Tuxtxt v. 1.99
    * for use in flash or MB (via NFS, HDD or MMC )
    * Date image 24.12.2008


    Function Buttons:

    * BLUE - Nemesis Panel
    * BLUE > 1s - ECM INFO, EMM INFO e PID INFO
    * 2x BLUE - Addons
    * YELLOW – Plugins
    * YELLOW > 1s – EMU - CS Info
    * GREEN – subservices
    * GREEN > 1s – EPG Control Center
    * RED - EPG list for active channel
    * 2x RED - EPG style menu(Included epgui, MvEPG, WeekEPG you do install it to activate a function)

    Global News:

    * Fix CVS for minor bugs about USB 2.0 port
    * Nemesis Panel 4.4
    * Cam Manager 4.4
    * Fix green button in play mode
    * Minor bug fix

    New CVS feature:

    * Add listbox shortcut (0-9, red, green, yellow and blue)
    * Add Permanent timeshift (beta)
    * And lot of bug fix (see http://cvs.tuxbox.org for more info)


    EPG Control Center:

    * Hard recoded
    * Integrated EPG loader directly form Sat, (Upgradable)
    * Full support for EPGui, MVepg, WeekEPG and EPGFind.
    * Manual EPG download
    * Scheduled EPG download, via Enigma Timer list
    * Select channel to download
    * Reorder channel for EPGui via GUI interface
    * Update EPG channel list, and channel name
    * Full support for EPG Themes (Upgradable)
    * Lot of EPG loader info


    User Script:

    * Partially recoded
    * Add script cancel button
    * Minor bug fix


    Move var:

    * Partially recoded
    * Minor bug fix


    Special Thanks to our developper MaxZ4 for EPG loader
    Special Thanks to Lukkino for opentv source code


    Regards:
    - developper and betatester.
    - Skin by Matrix10
    - New Bootlogo 4.4 and graphics by Server


    ================================= ================

    !!! ATTENZIONE - IMPORTANTE:
    !!! QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE' INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
    !!! EDG-NEMESIS NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

    !!! WARNING - IMPORTANT DISCLAIMER:
    !!! THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
    !!! EDG-NEMESIS IS NOT RESPONSIBLE IN ANY WAY FOR WHAT THE USERS WILL DO WITH THIS FIRMWARE.

    ================================= ================

  2. The Following User Says Thank You to Gone_Fishing For This Useful Post:

    teknokat (28-08-2013)

  3. #2
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    EDG-Nemesis 4.4 for Memory Card ( either mmc card or sdcard )

    --------------------------------------------------------------------------

    Unpack the files from the unpacked folder into your fat (fat16) formatted memory card.

    Procedure:

    Switch OFF the TM9100 receiver, and insert the SD card.

    Switch ON the TM9100 receiver and the Files will load.

    When complete the Receiver will report "Done" on its display.

    Switch OFF the TM9100 receiver, and remove the SD card.

    Carry out a Factory Reset as follows:

    Switch ON the Mains power to the TM9100 whilst pressing the UP button on the Front Panel.
    Using the UP or DOWN button, select on the TV screen "Factory Reset".
    Start the Factory Reset by pressing the RIGHT button.
    When the Factory Reset is complete, proceed with the basic setup as normal.

    If you have a spare SD card it is advisable install a Swap-file on it.


    USE THE CORRECT FILE FOR YOUR BOX

    9100 is for the basic 9100 model only

    9101 or 9100S is for the 9101 super model only

Similar Threads

  1. BBCPrime
    By stavros in forum Viaccess
    Replies: 12
    Last Post: 16-11-2008, 08:59 AM
  2. TM-6900 Super review * Picture Heavy *
    By Bazza in forum 6000 series
    Replies: 16
    Last Post: 28-09-2008, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •