Vantage 8000t/s help

[xlr8r]

well....version 2.40 caused total mayhem with my Diablo cam this time. Now when i have the cam installed , the receiver will not move the motor at the dish ....:o15:

...back to the drawing board...or back to version 2.32 it is ....

[satesco]

...back to the drawing board...or back to version 2.32 it is ..

Sorry for your..."back to version",but thanks for your info.
By the way,do you know how to make my harddisk WesternDigital{MyBook} of 500 G to be seen by Vantage through eSata cable?I formated harddisk to Fat32 and partitioned in32 GB,but without succes.Only through usb cable i can seen WD in receiver.Any solution?

thanks in advance

[Quailman]

I'm using the 02.40t-o and have no problems but i don't have a motor and sly still doesn't work. Im thinks of getting a motor kit but have no idea whats what, can you recommend any thing?

[xlr8r]

I'm using the 02.40t-o and have no problems but i don't have a motor and sly still doesn't work. Im thinks of getting a motor kit but have no idea whats what, can you recommend any thing?

the guy at this site h**p://www.creativesatellite.co.uk/ is pretty helpful

(note: remove the 2 *'s and replace with tt to view the website, im not sure if i can post weblink here ...?

if you use the CONTACT link on the site, they will get back to you via email/phone and give you good advice.

:respect-050:

[xlr8r]

Sorry for your..."back to version",but thanks for your info.
By the way,do you know how to make my harddisk WesternDigital{MyBook} of 500 G to be seen by Vantage through eSata cable?I formated harddisk to Fat32 and partitioned in32 GB,but without succes.Only through usb cable i can seen WD in receiver.Any solution?

thanks in advance

Hi,

i believe you can only use SATA and not eSata..?:respect-050:

Im using a WD greenpower 1TB internal drive in SATA mode and works ok, use vantage HDD menu to format it.