Results 1 to 4 of 4

Thread: firmware upgrade ?

  1. #1
    Junior Member
    Join Date
    Sep 2008
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    firmware upgrade ?

    Hi..i tried to load f/w v.133 in my DSR 9500CI (No VIA) receiver and sucessfull, but it doesn't come up. No clock.only 9500 displayed and goes blank.

    Any advice to work around this problem..pl reply.

    thanks

  2. #2
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    only the ones with certain firmwares etc in them are patchable

    details are here https://www.satpimps.co.uk/showthread.php?t=56629

    sounds like yours is one of the ones that cannot be patched

    you need to check the loader number etc , but usually its only the older via ones that can be patched

    moved to the correct section too

  3. #3
    V.I.P cuorino's Avatar
    Join Date
    Dec 2004
    Posts
    51
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Use hyperterminal in windows:

    switch off on the back stb.
    Start/Program/Accessories/Communications/Hyper Terminal

    Setting the Hyper Terminal

    1. Start Hyper Terminal.
    2. In the field "Name" write for example Samsung 9500, choose an icon and click OK.
    3. In the new opened window, near "Connect using" choose "Direct to COM1 or 2 or 3, afterwards click OK.

    Port Settings

    1. Bits per second : 115200
    2. Data Bit : 8
    3. Parity : NONE
    4. Stop Bit : 1
    5. Flow Control : Hardware
    Click OK

    Uploading software into Hyper Terminal

    1. Choose TRANSFER
    2. Then choose SEND FILE ....
    3. BROWSE - select from hard drive the desired version of software (e.g. emu 7.3.bin)
    4. Choose 1KXmodem for Protocol
    Don't press the button "Send", you will do it subsequently.

    After you have done the procedure described, connect your computer with Samsung using a RS232 connection cable.
    Before you start uploading the new software into Samsung I would advise you to firstly remove all the cams or cards from it (if any are inside).

    The things you have to do are :

    1. keep pressed the "right arrow" (volume up) and the main switch on the back

    Keep pressed until the "3-01" appears on the display and appairs all CCCCCCC
    from that moment the computer will show "............................ ... Loading"
    4. In that moment, in the Hyper Terminal, click the button "Send" (you have about 15 seconds to perform that operation).
    With clicking on "Send" starts the uploading the software into Samsung.
    Don't be hasty! Wait for entire process to terminate.
    Process is terminated when on the Samsung a clock appears.

    If you have done all properly, there is a desired version of software in you Samsung.
    The easiest way to verify if upload succeeded : Menu/System properties/System information.
    All versions of the EMU software has the version number 133, to not confuse you.

  4. #4
    Mildly Important Nymph :D goran's Avatar
    Join Date
    Dec 2004
    Posts
    2,225
    Thanks
    0
    Thanked 4 Times in 4 Posts

    Icon12

    Yep, not only VIA CI any longer, thanx to Maestro Mahdi but also CI, FTA and EM VIA, if memory serves, can all be upgraded to any of his work after a certain date. Certainly any 7.x and 8.x EMU by MAHDI!!!

    Sadly, I no longer have my Sammy - gave it away as I got DBox2 - but as you can see it's a thing of beauty and tender loving care, so I still come and share if I can, here and there...

Similar Threads

  1. New Firmware?!
    By LittleDerick in forum Echostar
    Replies: 0
    Last Post: 13-04-2007, 06:54 PM
  2. visionnet How to (PLEASE READ)
    By Graham7 in forum Visionnet
    Replies: 1
    Last Post: 27-11-2006, 07:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •