After loading tps files with usb stick do i have to initialize them before they work.
After loading tps files with usb stick do i have to initialize them before they work.
Last edited by logout; 31-07-2008 at 10:36 PM.
No. Just press X+ on your remote, select TPS Autoupdate and press OK.
Your receiver will reboot and that's you done.
Thanks for that. could you point me in the direction of any threads that explain about that and other how to updates made easy. eg how to initialize softcam update cant pick up prem on 19 east.
Last edited by logout; 01-08-2008 at 03:03 PM.
Quack
Look in here, mate: https://www.satpimps.co.uk/showthread.php?t=89360Originally Posted by logout
You'll find the instructions in there
You might find this helpful:
How to update software in Octagon SF 918 :
Just UNZIP ALL the Files when you place them onto your Stick.
NO Folders what soever. Just the Files.
1.Get yourself a Memory Stick 1 or 2Gb.
2.Load the unzipped S/W onto the Stick.(OCTAGON_HD_SF918_EMU_AU_V1 022__07_07_08_HDT V)
3.Get the Latest Main Softcam for SF918HD (approx 67KB size)
4.Get the latest Softcam for BISS and CW updated (approx 6KB size)
5.Get the latest TPS Softcam Update (approx 6KB size)
6. Insert Stick into 918
7.Stick will be recognized. If NOT, go to Menu and USB.
8 Now LOAD the S/W V.1022...Box will ReBoot.
(after Loading do a Factory Reset.)
9.In the same way as above Load the Softcam (The Instructions how to Activate the EMU are in the the S/W included.)
10.Scan your Sats. Go to Memory BackUp and Save these settings.
That's it basically now you should be up and running.
You DO NOT have to do a Factory Value (Reset) after loading Softcam Files.
Thanks to Andrew007 for the guide
Thanks got it all back working.
Hi,
Having done all the above, no auto-update and no reboot happened with the TPS bin file. Any advise thanks
Posting Permissions
Reply With Quote
Bookmarks