I have this receiver and it is just stuck with 'boot' on the front LED display.

I can comunicate with the box Via nullmodem cable but no matter which image i try i get Error when it has finnished booting and the box just sticks with @boot' on the front display.

I have motitored what is going on duing boot via hyperterminal and this is what i get...

U-Boot 1.1.1 (Nov 29 2006 - 2305)

CPU: IBM PowerPC STBx25xx(51510950)
Board: relook200s
I2C: ready
DRAM: 28 MB
FLASH: 8 MB
*** Warning - bad CRC, using default environment

partition "db" selected.(ffda0000,230000)
Partition changed to 3
### JFFS2 loading 'init.denc.uboot' to 0x10
Scanning JFFS2 FS: ... done.
find_inode failed for name=init.denc.uboot
load: Failed to find inode
### JFFS2 LOAD ERROR<0> for init.denc.uboot!
init.denc.uboot load fail
checking welcome image... ok.
gzip compressed welcome image.
Data (writethrough) Cache is ON
Partition changed to 3
### JFFS2 loading 'init.stv6412.uboot' to 0x10
### JFFS2 load complete: 170 bytes loaded to 0x10
## Executing script at 00000010
Un-Protect Flash Bank # 1
Press Ctrl-z to debug bootloader.
booting...
## Booting image at ff840000 ...
Image Name: Linux Kernel Image
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1354023 Bytes = 1.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.6.17-cubecafe (root@localhost) (gcc version 3.4.4) #1 Sun Sep 30
00:17:33 CEST 2007
relook200s (cubeCaFe) DGStation Co. http://www.dgstation.co.kr
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 panic=1 mem=28m vi
deofmt=pal
PID hash table entries: 128 (order: 7, 512 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 25396k available (2164k kernel code, 760k data, 92k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.1 + autolzma (2006/10/05) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered (default)
IBM GPIO driver version 07.25.02
IBM GPIO driver version 07.25.02
GPIO #0 at 0xc205e000
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
serial8250: ttyS2 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
dm9000 Ethernet Driver
dm9000: 16 bit io datasize.
dm9000: Invalid ethernet MAC address feched from srom, tring bios
eth0: dm9000 at c2060000,c2062004 IRQ 26 MAC: 00:13:1819:85
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
IBM Redwood 4/6 IDE driver version 2.1 S
detected IOADDR: f2000000/f4000000
DMA addr: fce00000
using irq 25
relook: flash mapping: 800000 at ff800000
DGStation relook200: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 9 MTD partitions on "DGStation relook200":
0x00000000-0x00040000 : "nor.config_welcome"
0x005b0000-0x007d0000 : "nor.db"
0x00190000-0x005b0000 : "nor.root"
0x00040000-0x00190000 : "nor.kernel"
0x007d0000-0x00800000 : "nor.boot"
0x00040000-0x005b0000 : "nor.kernel_root"
0x00040000-0x007d0000 : "nor.kernel_root_db"
0x00000000-0x007d0000 : "nor.all_noboot"
0x00000000-0x00800000 : "nor.all"
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
SQUASHFS error: zlib_fs returned unexpected result 0xfffffffd
SQUASHFS error: zlib_fs Failed!! trying to lzma

VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 92k init
init started: BusyBox v1.4.1 (2007-09-01 1522 CEST) multi-call binary
**** rcS
**** mountall
**** loadmodules
relook400: Unknown symbol SetFrequency
relook400: Unknown symbol
Oops: kernel access of bad area, sig: 11 [#1]
NIP: C0030780 LR: C003075C CTR: 00000000
REGS: c1573e00 TRAP: 0300 Not tainted (2.6.17-cubecafe)
MSR: 00029030 <EE,ME,IR,DR> CR: 24000424 XER: 00000002
DAR: C2ABF528, DSISR: 00000000
TASK = c1bb2470[37] 'insmod' THREAD: c1572000
GPR00: 0000FFF1 C1573EB0 C1BB2470 0000001E 00000DD2 FFFFFFFF C017129C C0280000
GPR08: C028DC87 C2ABF51C 00003FFF C02D0000 24000422 10076AF4 00000022 C29983C4
GPR16: 00000021 C1BBE580 00000528 007FFF00 013EB7C4 00000578 C297F67E 0000010B
GPR24: FFFFFFFE C293E000 C297F79C 00000578 00000000 00000003 C29F0760 C29E38E4
NIP [C0030780] sys_init_module+0xaa4/0x1370
LR [C003075C] sys_init_module+0xa80/0x1370
Call Trace:
[C1573EB0] [C003075C] sys_init_module+0xa80/0x1370 (unreliable)
[C1573F40] [C0002C94] ret_from_syscall+0x0/0x3c
Instruction dump:
7caf2a14 389e000c 4bfe5015 3b00fffe 48000030 a13f000e 2f890000 409e000c
813e0140 48000010 1d290028 7d29d214 <8129000c> 801f0004 7c004a14 901f0004


can any 1 advise what software to flash to this box , its driving me mad.


ta

karl