These lines are to be replaced
290e:011a0000:090b:003b:12:0
10510
p:,f:40
These lines are to be replaced
290e:011a0000:090b:003b:12:0
10510
p:,f:40
at last i've got it working, it's took a bloody week though.
so this is what i did....i d/l Likra's updated 26/06/2008 and i found that by modding it slightly it worked on Nabilo blackhole.
i used crimson editor and entered these settings you'll find ITV HD listed at the very bottom:
290E:011A0000:090B:003B:1:3412
ITV HD
p:BSkyB,c:000d49,c:030d49,c:040d4 a,c:050001,f:5
unplugged the power and powered up, got the ITV HD splash screen.
hope it helps you.
regards: canthackit
Last edited by canthackit; 03-07-2008 at 08:38 AM.
DREAMBOX DM 800 owners this Channel list works and gives you ITV HD
DM800-ROTOR@likra26.6.2008
ITV-HD working with this
Code:http://www.sendspace.com/file/8vzzhu
Hi all
i'm having the following problem error coming up when i try to send this file to my ne dm800 i'm using dremboxedit to transfer the channel list
Dreambox response: Login successful.
Starting FTP transfer
Transfer complete
** Sending file "/var/tuxbox/config/enigma/lamedb" **
Starting FTP transfer
Transfer aborted
Error sending file "lamedb" to the Dreambox.
Disconnecting.
Disconnected.
help will be much apreciated
regards Jono
Update sorted it out with a little help now using openDBedit V3.0.6 and i had not ticked enigma2 so it was thinking it was loading filrs to enigma1 so sorted channel list in and working
Jono
Last edited by Jono; 08-07-2008 at 06:59 PM. Reason: update
Anyone still have ITV HD working ?
Yep all ok here, and for the first time there is actually a program on it. LOL
ki
What settings have you got in your lambdb
as i've tried all listed on here.
Waited all week to see if I can get it to work lol.
I can get sound, but no pic.
Hi guys I'm using the likra settings from end of june. 26th I think, There may be something a little deeper. I had turned to my normal itv HD channel where I usually get the itv hd logo. Then I found that there was a program showing thats what I posted above. Well they are now showing the news. I am wondering if they have moved the channel somewhere else and this is normal itv1.
ki
Hi cokeaddict,
Its been ages since I edited my lambdb file but I have just had a quick look back and the lambdb file it in ect/enigma 2. I took the settings that are shown earlier in this thead and stuck them at the every end of the list. Just before it says end. Then do a hard reboot and it should appear in your channel list.
I have not had to mess for ages though, every time a put a new image in flash or barry allen I copy the same channel list accross and its just there.
When I tried to borrow someone elses lambdb file I ended up screwing loads of other channels up.
ki
No I was right the screen has now reverted back to the itv hd logo.
ki
ok tried that, still no good
What image are you using ?
If using nabilo could you do me a favour and go to itv hd, press blue, then yellow and go to service info, then press green and give me the PIDs showing on your screen please
Here you go.
Video Pid - 0x0d49 (3401d)
Audio Pid - 0x0d4a (3402d)
Pcrpid - 0x4d49 (3401d)
Pmtpid - N/A
Txtpid - N/A
Tsid - 0x090b (2315d)
Onid - 0x003b (59d)
Sid - 0x290e (10510d)
ki
Thanks for that.
I have tried those settings already and just tried them again.
Still black screen, no ITV HD logo or anything :(
Right I give up.
I've just tried 4 images and wiped all my personal channel settings to reload an untouched likra settings file from 26.6.08 and still just a black screen on ITV HD :(
Have you done a hard reboot. I mean pulling the plug out of the wall whilst still powered up. I think we found when we where testing this that if you did not do a hard reboot and only a reset that the settings we not stored and kept reverting back.
ki
Ok finally sorted it out
Nice clear ITV HD logo on my screen now lol
Seems dreamset don't like the settings and corrupts them somehow.
Just used opendbedit and fired in the 21.7.08 setting and it worked first time.
So opened my backup settings (with my personal channels list in it) and copied the info from the likra 21.7.08 back into my lamedb and sent it over with opendb and it's all working now
Bookmarks