tecnomate 5400+c

[barron]

I would like to know how to put the settings in
WITH A USB STICK would it work or I have to
attached the reciever to my computer
with a usb cable and where do I get the settings from
do you have to get a special progome to do it
thank you:respect-055:

[satwyn]

what is ment by settings if you mean new software channel lists ect you will need a pc to load the usb only plug into receiver press usb on handset load new file official or magic patch very simple

[clipper]

I would like to know how to put the settings in
WITH A USB STICK would it work or I have to
attached the reciever to my computer
with a usb cable and where do I get the settings from
do you have to get a special progome to do it
thank you:respect-055:

********************************* **************
if you mean by settings the patch.softcam, chn lists etc
these can all be loaded on the box with a memory stick
you can use a null modem cable and the v187 to do the above
if you mean something else please post back.

[barron]

thanks m8 I mean the channel list
what progame Do I have to use
when I had the hummy I used to put the settings in then download it to my hummy

[satwyn]

latest channel list is on official technomate website load to memory stick thats all thats needed

[Aldo]

Just got this info from another forum:

yes you can drag and drop, with the memory stick in the computer
I right click IE: on the patch and on the small panel that opens i go
to [send to] then i left click removable disk[e] and the file transfers
to the memory stick. after this put the stick in the receiver press
the usb button on the remote and go to data transfer and click the file and load on the receiver following the on screen info. after the receiver has re-booted i remove the stick. and to save any confusion etc: i put the stick back in
the pc and delete the file and clear the stick for it's next use.

I hope that this is of some help to you

[tr8.]

The channel lists for the 5400ci+usb is quite easy.
first you can load a cndf or ndf file
the ndf is from the 1000 series
the cndf is from the later both work.

these files can be edited and changed using clarke tech editor
load them to usb
go to menu
usb
data transfere
choose the file

[streetburner]

No Download Channel list on TM5400CI, only UPLOAD in the Data Transfer menu. Does anybody know how to download the channel list to usb stick to save. Has anybody got a Download menu showing. Or do I have to do it via laptop & null modem & TM Loader. Any help appreciated! Hope this is correct to post here or should I have started a new thread. Streetburner

[drahcirk]

thank u aldo ,that was very helpful,.:respect-010:

[tr8.]

No Download Channel list on TM5400CI, only UPLOAD in the Data Transfer menu. Does anybody know how to download the channel list to usb stick to save. Has anybody got a Download menu showing. Or do I have to do it via laptop & null modem & TM Loader. Any help appreciated! Hope this is correct to post here or should I have started a new thread. Streetburner

What reciever is it?
5400ci+usb?
put usb stick in.
menu
usb
data transfere
code is 0000
select file listed on you stick it will down load
the colour buttons will upload

[streetburner]

Yes the TM5400ci+usb. What I am trying to do is save the list that I have edited on the reciever to my usb stick incase there is a problem at a later date,zz then I won`t have to delete all the rubbish ones off again. thanks for replying.

[tr8.]

When in there just hit the green button
it will save the cndf file auto to tour stick
if you load clark tech editor to your pc you can then play around with it.

tr8

[KoFi]

YEP I have backed up my chans touch of a coloured button
beats a r232 connection
very fast upload / download of data

[streetburner]

Thanks TR8, always get mixed up with the download/upload direction, Does it save your favourites also, if not how do you. Thanks again.