Page 1 of 2 12 LastLast
Results 1 to 20 of 34

Thread: help with servers !!

  1. #1
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts

    help with servers !!

    Hello all,

    I did a reset to factory default settings and all scrambled channels are gone !!!
    Is it that i lost my server settings ??
    what can i do now guys ??? i dont know the address or ip of the server i had !!! where can i get a list of servers please ???

    Please help since i didnt use that receiver for a long time!!!

  2. #2
    V.I.P Graham7's Avatar
    Join Date
    Dec 2004
    Posts
    645
    Thanks
    4
    Thanked 12 Times in 7 Posts
    Check PM(Private message)

    Make sure all so that you have the EMU on have you got the smart card in the menu.

  3. #3
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Actually i don't have that smart card showing in the menu even after pressing 9999 on the remote control unit....what firmware shall i upload to the stb ?? any specific version ?? cuz i cant get to edit the server with the one i have in pm message, when pressing Fn button i get only weather and no info about network!!.....please guide me through to fix this problem.....thanks Graham7 :-)

  4. #4
    V.I.P Graham7's Avatar
    Join Date
    Dec 2004
    Posts
    645
    Thanks
    4
    Thanked 12 Times in 7 Posts
    Press 8888 and you should get the smart card it not 9999 on the pay SW. Look to see if it works and if not do what I sent to you by PM.

    PS not sure if you lost the code if you do it to factory default settings cannot remember.
    Last edited by Graham7; 25-05-2008 at 09:18 AM.

  5. #5
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    OK bro i will try that later on and keep you posted, but tell me, in case that 8888 code doesn't work, which firmware shall i flash on my stb ?? and whats the difference between visionnet s and visionnet cis and how to know which one i have......

    Cheers.

  6. #6
    V.I.P dxdy's Avatar
    Join Date
    Dec 2004
    Posts
    437
    Thanks
    0
    Thanked 3 Times in 2 Posts
    CIS is model for CAM modules.... (what is writen left of display on your receiver? VN-8000S or VN-8000CIS)

    for enable Smartcard , for payserver SW is 8888
    also for setup payserver IP address and enter code you go to MENU - Installation - FN

    you dont loose code if only reset to factory defaults, only channel list... payserver have big BUG and you CANT use motor channel list... allways when you go to change antenna settings, you lose channels list...


    P.S.
    go to Xvision forum and in Software and Co you have all (payserver software, active IP addresses)
    Last edited by dxdy; 25-05-2008 at 12:15 PM.

  7. #7
    V.I.P dxdy's Avatar
    Join Date
    Dec 2004
    Posts
    437
    Thanks
    0
    Thanked 3 Times in 2 Posts
    also if you have active code entered in payserver SW and if SW 1.24 or lower, DONT UPGRADE WITH NEW SOFTWARE.... you be lost code

    only SW 1.27 and newest have code protection only for Software Upgrade... (if you done Upgrade bootloader with 1.27 or newest SW)

  8. #8
    V.I.P Graham7's Avatar
    Join Date
    Dec 2004
    Posts
    645
    Thanks
    4
    Thanked 12 Times in 7 Posts
    If you have got 1.24 on do not update as dxdy says if you have the pay server working like Nova. If 8888 does not work try 9999 may take more than 4 times to get it to comes on.

  9. #9
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks for the info guys but maybe here i did a mistake since the sw i have now is 1.29 so i dont know if this is bad or not lol.....anyway i did everything graham7 told me in the pm, the only problem i face now after entering the IP address is the access code !!! where can i get that from ???


    Cheers...

  10. #10
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    dxdy thanks for the info bro but what is the url for that xvision website ??

    Cheers...

  11. #11
    V.I.P Graham7's Avatar
    Join Date
    Dec 2004
    Posts
    645
    Thanks
    4
    Thanked 12 Times in 7 Posts
    Quote Originally Posted by stu1st View Post
    thanks for the info guys but maybe here i did a mistake since the sw i have now is 1.29 so i dont know if this is bad or not lol.....anyway i did everything graham7 told me in the pm, the only problem i face now after entering the IP address is the access code !!! where can i get that from ???


    Cheers...
    This you will have to find for yourself sorry I cannot help on this.

  12. #12
    V.I.P dxdy's Avatar
    Join Date
    Dec 2004
    Posts
    437
    Thanks
    0
    Thanked 3 Times in 2 Posts
    for code ask who sells visionnet in your country...

    for xvision just google "Xvision - welcome to the pleasure dome"

    1.29 is good if this payserver SW... if you load original 1.29 this not good
    you can access to payserver menu? MENU - Installation and press FN?

  13. #13
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    can i find those access codes in the xvision forums ???
    Does each server have its own code ???

    Cheers.

  14. #14
    V.I.P Graham7's Avatar
    Join Date
    Dec 2004
    Posts
    645
    Thanks
    4
    Thanked 12 Times in 7 Posts
    Quote Originally Posted by stu1st View Post
    can i find those access codes in the xvision forums ???
    Does each server have its own code ???

    Cheers.
    No you will not find then there but will find the URL for the server when they change.

  15. #15
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    and yes i can get to the pay server menu with fn in menu but my problem now is the reg code.....can i get any in the xvision forums ??

  16. #16
    Cool Dude drpaulos's Avatar
    Join Date
    Jul 2005
    Posts
    881
    Thanks
    3
    Thanked 26 Times in 8 Posts
    No there are no codes in the Xvision board.

    Doc

  17. #17
    V.I.P dxdy's Avatar
    Join Date
    Dec 2004
    Posts
    437
    Thanks
    0
    Thanked 3 Times in 2 Posts
    codes not free and you must this to find alone... ask peoples who sells visionnets in your country...

  18. #18
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    ok so we are ending up paying someone to do it for us :(((

  19. #19
    Junior Member
    Join Date
    May 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    and what about free servers, any available anywhere ???

  20. #20
    V.I.P dxdy's Avatar
    Join Date
    Dec 2004
    Posts
    437
    Thanks
    0
    Thanked 3 Times in 2 Posts
    no free servers...

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •