Results 1 to 2 of 2

Thread: EDG-Nemesis 4.1 for original tm9100

  1. #1
    V.I.P onecard's Avatar
    Join Date
    Dec 2004
    Posts
    150
    Thanks
    6
    Thanked 0 Times in 0 Posts

    EDG-Nemesis 4.1 for original tm9100

    EDG-Nemesis 4.1 for original tm9100

    info here https://www.satpimps.co.uk/showthread.php?t=81813

  2. #2
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    EDG-Nemesis 4.1 for Memory Card ( either mmc card or sdcard )

    --------------------------------------------------------------------------

    Unpack the files from the unpacked folder into your fat (fat16) formatted memory card.

    Procedure:

    Switch OFF the TM9100 receiver, and insert the SD card.

    Switch ON the TM9100 receiver and the Files will load.

    When complete the Receiver will report "Done" on its display.

    Switch OFF the TM9100 receiver, and remove the SD card.

    Carry out a Factory Reset as follows:

    Switch ON the Mains power to the TM9100 whilst pressing the UP button on the Front Panel.
    Using the UP or DOWN button, select on the TV screen "Factory Reset".
    Start the Factory Reset by pressing the RIGHT button.
    When the Factory Reset is complete, proceed with the basic setup as normal.

    If you have a spare SD card it is advisable install a Swap-file on it.


    USE THE CORRECT FILE FOR YOUR BOX

    9100 is for the basic 9100 model only

    9101 or 9100S is for the 9101 super model only

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •