morning mate,i have the cas 2,after programmimg i set all as u say above and left it on history all night,nothing.tried formating gives me error,i think iam destined not to have it :(
morning mate,i have the cas 2,after programmimg i set all as u say above and left it on history all night,nothing.tried formating gives me error,i think iam destined not to have it :(
That can't be right.
Initially, I tried to just update with UW over Stealth, it would not work until I had formatted the cam with CAS3+. Before formatting, it gave the same 'Invalid CI module' message you are seeeing on all channels.
You need to concentrate on formatting the cam. Are you using latest CAS Studio 8.3a software?
Also, you should see Conax channels clear after a few seconds only.
Hi mate,when i put the cam in the pace it gives me all menus etc so iam assuming its programmed right,iam going to try and format it and see if it does it this time.thanks
programming the file again will not format.Many others have done it with the cas2 why isnt it working for me errr.
I don't think you'll get it to work without a reformat.
Are you using CAS Studio 8.3a?
I think this is a CAS2 issue I've heard of before. Try this if you are getting 'Format Error'...
Select 'Format' from the 'CAM Disk functions' tab. You see the 'Format Error' message.
Then go to 'Cam File System' tab and click 'Connect'. CAM should then format, takes a few minutes.
Then update with UW. Remember to alter Config settings again.
thanks mate i will try that,cheers.
Atlast after about 9 times programming,dont know why,thanks sparky for all your help mate,now time to get my head round adding key bins.
Great stuff!
You shouldn't need keys.bin at the moment, everything is AU. Some of them take a while...
Hi mate,just digi and prem will do me now.
If you watch Prem and see freezing and/or intermittant 'Invalid CI' messages, I would advise turning N2 AU off once the keys have updated, to prevent freezing on the Pace. Turn back on to update keys when necessary.
Digi takes quite a while to update keys, sometimes 5-10 minutes.
blummin gone all together now :(.i realy dont want to buy a cas 3.had all three.
what a bag of crap this pace is,got 2.3 now was up till 1am trying to get it to work,gonna connect my old echostar 808 up and try and activate the cam,never had anything like it
2.3 Diablo does not work with the Pace.
I have also tried.
strange it worked with 2.2,iam sure sparky mate has it working.
Haven't upgraded to v2.3, but old Diablo still works in Pace apart from the well do***ented problems.
Having said that, I've had enough of the Pace. I have now aquired a Topfield tf7700, and Diablo works perfectly in this... there are some things which I prefer on the Pace, but the Topfield seems rock solid with cams.
I also had trouble with diablo and cas2 would not format but I also managed in the end cam file system then connect now all ok
Bookmarks