Results 1 to 1 of 1

Thread: How to update to pay server.

  1. #1
    V.I.P Graham7's Avatar
    Join Date
    Dec 2004
    Posts
    645
    Thanks
    4
    Thanked 12 Times in 7 Posts

    How to update to pay server.

    I WILL NOT TAKE ANY RESPONSIBLE FOR ANY DAMAGE
    DONE.

    Information in this post is for educational
    purposes only.
    You can't use it to watch pay TV without subscription.


    YOU DO THIS AT YOUR OWN RISK.


    For software and loader for updating your VN go here.

    VisionNet VN8000 S/CIS m1.24 - CLNT
    https://www.satpimps.co.uk/showthread.php?t=72420

    How to update to pay server.

    How to update to pay s3rv3r.

    1.switch on your box

    2.make sure you have a channel list loaded, otherwise you may do a scan at the end .

    3.make sure it is connected to your router

    4.enable dhcp in your router, otherwise you have to input your box ip manually.
    85.select autodetect

    6.if you input your box ip manually, make sure you assign a free ip in the range of 000-254 (last block of your lan ip addresses)

    7.push menu on remote

    8.push 8888 on remote

    9.go to installations

    10.go to network setup

    11.if dhcp is enabled, select autodetect

    12.if dhcp is disabled, enter your lan data manually

    13confirm your selection with ok box will reboot

    14.after reboot fn key on remote returns information and weather.

    15.select information.

    16.information box pops up, saying ethernet plugged, ip address xxx.xxx.xxx.xxx, (which is your box ip in your lan), connection red box, status searching.
    exit with exit

    17.push menu on remote.

    18.go installations

    19.push fn on remote

    20.enter your user id (free selection)

    21.enter ip 218.xxx.xxx.xxx from manual
    ********************************* ***************************
    This is what it should look like.

    Us name G7(But what you want here not G7)
    password (No password)
    IP 218.***.***.***(This is the IP you have to us for the s3rv3r)

    Do not us the IP from the VN you have to us the s3rv3r IP.
    ********************************* ***************************
    22.push blue key on remote

    23.enter your access code manually and confirm with apply

    24.wait for message registration successful

    25.confirm with apply

    26.exit menu

    27.done.

    wait for s3rv3r connection.
    -----------------------------------------------------------------------------------------------
    If you cannot get connect do this.

    1.Press menu
    2.Press installations
    3.Goto factory default
    4.Press yellow button
    5.A box will come on click OK
    6.A other box will come on saying (Backup completed)
    7.Click OK
    8.The box will go off
    9.Goto OK and press OK
    10.The STB will save the information and reboot
    11.When the STB comes back on
    12.Click menu
    13.Press installations
    14.Press FN
    15.But in usname
    16.Goto IP address and but in the IP 218."""."""."""
    17.Goto OK
    18.Click apply
    19.A box will come on click YES
    20.Press exit
    Last edited by Graham7; 14-01-2008 at 06:25 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •