Hot 8.07

[Marco]

Humax ToH3.4 HoTplugged v8.7 - 2007-07-30
-- Version: A --
============================
- TPS AU on 10873 V (France4, France5)
wait about 15 sec.
tps.hdf disabled (no longer needed)
(many THX to Mahdi).

Respect to P.H and HOT


-https://www.satpimps.co.uk/showpost.php?p=459878&postcount=1

[TonyO]

the hummy still kicks.

[Marco]

your right there Tony
i think i will add France 4 & 5 in me favorites

[seti]

Thanks for the patch, but not working for me ? i load the patch then put on France 4 or France 5 but nothing ?

Any help welcome ..

[EDGE]

the hummy still kicks.

It certainly does m8,just updated mine after a while as ive only been using it to move my dish whilst using another STB.Thanx for your posts Marco m8,always good stuff buddy,cheers,EDGE.

[EDGE]

Worked for me seti,took about 2-3 mins tho

[Marco]

tps updates about 5 to 10 secs

[cooler]

Works fine great job.

Thanks for the patch, but not working for me ? i load the patch then put on France 4 or France 5 but nothing ?

Any help welcome ..

Make sure you have right digits for frequencies for france 4.

[ripley]

thanks to all concerned for this

[DAYDAY]

Tried this at 2am this mornin and thought i had buggered it by putting a new key bin in my Hummy

Had France 4 working for about 2 mins then nothing

Does the Card+Emu have to be changed to use this one

Cheers








Found out what i was doing wrong by doing alot more reading...........

I have just adjusted my Hummy clock and everything is sorted

Cheers

[slips]

thank for great work .to the humax team people.makes a lot of happy humaxer.

[mary12]

HI does this work tps on 19 east as well or just hotbird thanks

[ceyer]

HI does this work tps on 19 east as well or just hotbird thanks

It´s only for TPS on 13°E

[oulit]

Thanks ToH HoT team
for this very impressif works,

[seti]

Thanks DAYDAY

Adjusted my Hummy clock and everything is sorted.

[Mansoor]

I can't get it to work, I have put the time to GMT +2 and still nothing. Went back to 8.6 and a new TPS file and got it. What I am doing wrong?

[seadragon]

thanks alot.
at first I foregot to change the time to +2hrs.

everything working great now.

[McDude]

I can't get it to work, I have put the time to GMT +2 and still nothing. Went back to 8.6 and a new TPS file and got it. What I am doing wrong?

Power your hummy off fom the back switch for a bit, then back on. Go to France 4/5 or M6 music black or any channel on 10873V and wait for AU. Dont forget to keep the time as GMT+2

[marco1]

Hello, everyone, my hummy doesn't work with the new patch ToH3.4 v8.7 and i don't know what else to do. After loading the patch, the new table following the last humax key bin, i adjust the clock and i change to channel france4 or 5 waiting and nothing happen. what is strange is the ram editor only with "zeros", is this normal? Any help would be welcome. Thanks in advance. Regards,

Marco1

[Marco]

if you dont sse any keys in ram editor. try putting catone on again
then put key bin in you hummy.and you will see your keys in the editor
then try for tps au again