DISEqC MENU

[charlie]

CAN ANYBODY TELL ME HOW TO GET INTO THE DISEqC MENU ,I NEED TO CHANGE THE SETTING FROM NO DISEqC TO COMPLEX, I DONT WANT TO DO A FACTORY RESET ASD,THIS WILL LOSE ALL OF MY SETTINGS THANKS

[echelon]

menu , 6 , second one down , sat installation and tp edit , sat config

goto top one and choose in there

[charlie]

THANKS FOR QUICK REPLY,IV'E HAD A GO AT THAT CONFIGURATION SELECTED MANY SATELLITES VIA DISEqC ROTOR THEN SAVE BUT DISH WONT MOVE TO NEW POSITION WORKING OK ON MANHATTEN ST200

[zad]

the 9100 has had some issues with rotators, it may be a good idea to try a different image and see what happens (you could try this over iboot this way you will loose none of your settings in the flash)

ps turn off the caps mate!

[echelon]

THANKS FOR QUICK REPLY,IV'E HAD A GO AT THAT CONFIGURATION SELECTED MANY SATELLITES VIA DISEqC ROTOR THEN SAVE BUT DISH WONT MOVE TO NEW POSITION WORKING OK ON MANHATTEN ST200

all I can tell you is the answer to your question

ie:- you asked how to get into it and I told you

once you are in there you are at the mercy of if it works or not , and as zad says some ppl have problems with it , possibly depending on the image used


I would also ask that you turn off the caps lock , its on the left of the keyboard next to the A key

[charlie]

thanks again maybe the question i should have asked is how do i go to the tv system ****** ,or does this only occur after a factory reset? thanks zad but i dont know how to iboot the reciever.

[zad]

its all stars mate so dont quite understand what your asking.

[A]

UR8 BETA 5 FOR MOTORS.
You need to add postion numbers manually if not using usals

[echelon]

thanks again maybe the question i should have asked is how do i go to the tv system ****** ,or does this only occur after a factory reset? thanks zad but i dont know how to iboot the reciever.

menu , 6 , system settings , av settings

reading the manual might help

might be an idea to try this new image too

https://www.satpimps.co.uk/showthrea...385#post452385

[charlie]

thanks got enough to keep me going tonight as i did a factory reset and lost everything

[charlie]

may i apologise to all for using caps lock, i did not realise until a friend told me today that it was a way of flaming! should have read the forum rules more thurough, did not mean to offend thank you

[tr8.]

what i did was take a note of the sat no's from my 1500super as it moved the dish, put the same no's into the 9100 as a non usals multi sat, conected via loop through so both run the same vbox2 with the same place setting its working a treat, as long as one box is on at a time, but only the 1500super turns off the vbox2 that i am confused as to why but will work out

tr8