I cant

[A]

Finally got the box put juliet 06
I the auto add on for cc cam working ?
Because I cant see it from the blue panel.
I have put that url in the var/juliet folder
I have never installed cc cam manually before.

[peggle]

When I did this last week CCCam1.70 could be installed manually, but not 1.71.

Don't know if other versions have been posted since.

I'm using 1.70 which is fine for everything I want including Premier using SBCL.

---------------------------------------------------------------


Manual Install Of CCcam 1.70.

Start DCC.
Navigate to & open the CCcam Bin folder.
Use FTP to copy the CCcam file into the var, bin folder.
Right click on it, select Attributes. Click 755. Click OK.
Navigate to & open the Juliet folder.
Copy ccam.emu to the var, Juliet folder & change to 755.
Reboot.
Press Blue & check if its there. If not, press 1, Remove Addons <Enter>, Exit & check again.

[A]

what cc cam file there are many

[echelon]

what cc cam file there are many

v1.70 works fine for me

glad to hear it finally turned up after all this time

the installs from the net dont work on juliet006

so you can install the gz files using manual , or you can copy the files over using dcc and setting any files to chmod755 where appropriate

[A]

okay on cc cam 1.70 It does not tell me which folder to put the files.
I know how to work with DCC and dreambox.

[echelon]

okay on cc cam 1.70 It does not tell me which folder to put the files.
I know how to work with DCC and dreambox.

that one appears to be a dreambox file , its not the one I used anyway , as the one I used had folders in it

I have posted the one I use in the emus up top

I think I just used the bin and juliet folders , not the keys , and chmod to 755

[A]

okay I will check that

[A]

Now I need to see the cc cam which I cant

[peggle]

When I reinstalled yesterday I didn't see it at first. Was OK after this -

Press Blue & check if its there. If not, press 1, Remove Addons <Enter>, Exit & check again.

[A]

okay managed it more follows

[A]

emu working NOW THIS problem here is I neeed to edit the cccam config file which I cant find.
In the dreambox it is in var/etc.

[peggle]

If its to use with SBCL, they are new files. Download TM9100_SBCL.zip & TM9100_SBCL_Config.zip to get them.

------------------------------------------------------------------------

Watching Premier. ASSUMING computer IP 198.168.1.10.

Download the following files & unzip.

TM9100_SBCL.zip
TM9100_SBCL_Config.zip

Open CCcam with notepad.
Go to where it says IP ADDRESS HERE in CCcam and Newcamd, delete "IP ADDRESS HERE" & enter your PC's IP Address in its place.

Change from - N: IP ADDRESS HERE 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
to - N: 192.168.1.10 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Do the same with Newcamd.

Change from - CWS = IP ADDRESS HERE 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
to - CWS = 192.168.1.10 6001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

After configuring, move the files to the correct folders by FTP to your TM-9100:

Move via DCC:
CCcam.cfg --> /var/etc
newcamd.cfg --> var/tuxbox/config

Open SBCL 1.0:

1. Click on the TUNER tab and Click on Stop.
2. Change the Port to 6001 and enter the IP Address of the TM-9100 in Client IP (Menu > Setup > Expert Setup > Communication Setup).
3. Click on Start in the top right corner
4. At the top left side, click on S2-EMU
5. Cliick on AU and enable Nagra1 and Nagra2 (a tick will appear next to them) (you may have to click on them twice to see a tick).
6. Click on Enabled
7. Just to make sure click on read keys and auto ecm

[A]

the ccconfig file is in the keys folder I need it to be in the etc. folder of the var.

[A]

I need to cc cam to share

[echelon]

I need to cc cam to share

my advice is forget about sharing , just get it working for cabo , d+ and then premiere

sharing may come in future releases or whatever , but dont forget juliet006 is buggy and various options dont work

dreambox has had a lot longer development , so I am sure they will get all aspects working on the tm9100

so make sure you get the basics right , then look for the extras like cs , hard drive pvr to work , card readers to work etc

[A]

FIXED MOVED EDITED CCCAM CONFIG FILE to var/etc.
All fine

[A]

my share is working Lol thats all I have done till now

[peggle]

my share is working Lol thats all I have done till now

I know nothing about sharing.

Is it just closed groups of people or open for anyone?

I've seen links posted on M****Dec chatbox for Cyfra which seem to be for anyone.

Presumably more is available.

Can you please enlighten us?

Thanks.

[A]

this image is buggy for sure

[echelon]

cs is mainly closed groups you can trust as they have your ip address etc , and you need a card to share

and dont forget its against the rules to look for contacts etc on here

technical discussions are fine , but thats as far as it goes , no discussions about cs groups etc

as for the image , yes its buggy , but we know that already and I am sure it will improve

in my case I have premiere back , and so its worth the money just for that , as my tm1500ci can deal with tps , d+ and cabo etc