Astra 4*8 (5.0e)

[SAMH54]

hello Guys ,I am using Gibertini Dish 90CM.I live in leeds so site lat is 53.I get Eutelsat 7.0E weak all the others ok
up to 30W.
will someone correct me ,what am I doing wrong here,what should I be doing to get 4*8 .
My dish setting are set USALS.I have tried to adjust using dish move steps ,alas no joy??

[skomedal]

Channel names and frequencies would help @4.8 (5.0E )

Take a look here, might help:-

https://www.satpimps.co.uk/showthrea...V-Transponders

[Mickha]

It depends which channels, on 4.9E, you're trying to get, as some are difficult.
Try tuning in some on the Europe BSS beam, with a strong UK signal, like 11766 H 27500.

[catseye]

Also google search for King of Sat & select Astra 4.8 East

Many of the transponders changed FEC to 5/6 over the weekend

So you may start search & be wondering why your dish/box isnt picking owt up

[jag123]

forgotwhat channels are u after I live in westyorkshire 12 miles from u I have a I meter dish and can pull viosat in ok and tv 1000 etc I'm using a duo 2 resever as well iv just checked the satellite every thing ok hear like Mickha says try some of the channels on the European beam see if u can scan some on then like sis racing etc regards

[Mobley2]

hello Guys ,I am using Gibertini Dish 90CM.I live in leeds so site lat is 53.I get Eutelsat 7.0E weak all the others ok
up to 30W.
will someone correct me ,what am I doing wrong here,what should I be doing to get 4*8 .
My dish setting are set USALS.I have tried to adjust using dish move steps ,alas no joy??

Usals does not store any changes you make when moving the Dish, only Diseqc does this. You will need to check
your dish settings, if you find that you increase the signal by stepping the motor in Usals.

regards mobley2.

[holmroad]

Usals does not store any changes you make when moving the Dish, only Diseqc does this. You will need to check
your dish settings, if you find that you increase the signal by stepping the motor in Usals.

regards mobley2.

Not quite sure what you mean here mate, as I am on USALS with my TM5402HD M3 and 1.1m dish, also not far away from original poster but in North Lincs - and my blind scans always pull in most, if not all, available in UK!
Or if you are actually discussing merely setting up 4.8E from scratch for the satellite list, my satellite scan soon finds 4.8E loud and clear too!

[Mobley2]

As per the last sentence in the original post...." My dish settings are set Usals, I have tried to adjust using dish move steps, alas, no joy.
I was merely pointing out that you can not store step adjustment with Usals, you can only store step adjustments using Diseqc.

regards mobley2

[jag123]

how are u getting on with the europeam beam mate as in sis etc regards

[dOOds]

sis etc should all be reachable..maybe not with 80cm dish..that is on 4.8E..5E you have no chance.

Regards

[jag123]

a mate of mine has a 90 cm dish down the road from me and he struggles to get the viosat beam on 4.8 satellite I think u will be beter with a biger dish mate

[holmroad]

a mate of mine has a 90 cm dish down the road from me and he struggles to get the viosat beam on 4.8 satellite I think u will be beter with a biger dish mate

Maybe mate, but as with everything suppose you'll have to weigh up the pros & cons as to whether it's worth the extra cost to gain these channels anyway?

[gripper1]

longitude and latitude of wigan how to enter it into my technomate help please

can some please am try to enter 53.4930° N, 2.7133° W this in to my new technomate mk3 but what figures do i input please if some can help thanks am a novice

please forgive i hope i post in the right thread thank u