BB5 6630,6680,6681,n70,etc... SP UNLOCKER!!!

[Termy]

http://users.net.yu/~dejan/download/bb5.zip

******* CONECTION ******


For this program you need Fbus cable like DK5, CA43 or similar conected to ports from COM1 to COM9.
First unpack zip fiole and strat install.bat

In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM port setings!


******* USING ********

Program can be started successfully only if is COM port in file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.



READ PHONE:
***********
Reading info data from phone and making BACKUP file for that phone( Field 308,1).

IMPORTANT DO NOT delete or modify that file because can save your *** if something goes wrong.


WR BACKUP:
***********
With that function can write backup file with Field 308,1 if exist in BACKUP folder.

MAKE LOG:
***********

Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.


SP UNLOCK:
***********
Making unlock with codes calculated by BB5_calc.exe.



SP UNLOCK PROCEDURE


Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on screen.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone. 

That is all folks



If you got unlock codes from your provider and you used all yours 3 attempts 
to enter code via keypad then do the following: 
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei 
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb" 
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function

I have tested this this and unlocked the Nokia N70 on Three.

[gov400]

thanks for sharing mate. works fine on a n70 on voda

[Termy]

Instructions:
1. Connect DKU-5 or normal COM cable to computer
2. Set proper COM cable (must be, between 1 and 9)
3. Download unlocker, run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg (Open this with notepad) and write here proper COM port (1-9)
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created
8. Enter codes to phone (in /psw/ dir), or
9. Click SP UNLOCK to enter codes via FBUS (easier option, lol)

Job done.

Handsets supported in current version -

6630
6681
6680
n70
n71
n90

It wont work on any other handsets, like the N80, N73 etc etc.

I must stress ""PLEASE MAKE A BACKUP OF THE SP DATA BECAUSE IF YOU DONT AND ANYTHING UNTOWARD HAPPENS THE HANDSET MAY NOT BEREPAIABLE""

[xanadu]

Do I need drivers for this?

Program will not run using USB cable and 6680.

Just get error, says can't open com port.

I have edited the cfg file.

EDIT:
Found the COM PORT in Modem settings...is this right.?

Program runs but just hangs forever...

I guess it does not work with Orange branded phones 6630, 6680.

[Termy]

Do I need drivers for this?

Program will not run using USB cable and 6680.

Just get error, says can't open com port.

I have edited the cfg file.

EDIT:
Found the COM PORT in Modem settings...is this right.?

Program runs but just hangs forever...

I guess it does not work with Orange branded phones 6630, 6680.

This will unlock any network in the world m8.

Are you using the DKU-5 cable, if not then this is your problem m8. This software will not work with the DKU-2 or CA-53 cables, it needs to be the DKU-5.

[speedy_04]

this is big news, wonder if a certian serbian released it for free???

john

[Termy]

Yes m8, the Nokia god himself, Dejan Kaljevic released this as a birthday present to someone and due to the fact that Servia won the Eurovision song contest.

[szczecin]

Finally )

[aseman]

Hi, I have tried this software, and also getting no result....I am on COM2 (changed my usb port to work with COM2, as this is the only free com port that i have). When trying to read, it says Wait....Bad connection (check FBUS cable).

I want to ask about the "bb5_unlocker.cfg" . I opened with notepad and is says "COM2:" Is there anything i should add?

I am trying with 6680 and 6630 phones.

Thanks

[Termy]

Hi, I have tried this software, and also getting no result....I am on COM2 (changed my usb port to work with COM2, as this is the only free com port that i have). When trying to read, it says Wait....Bad connection (check FBUS cable).

I want to ask about the "bb5_unlocker.cfg" . I opened with notepad and is says "COM2:" Is there anything i should add?

I am trying with 6680 and 6630 phones.

Thanks

What cable are you using m8 ? There seems to be certain cable issues as some seem to work and others dont. Apparently the cables that can be used are the DKU-5 or the CA-42.

And all you need to do is configure the com port to the same one that the cable is using. You only need to edit the cfg if ithe cable is using com1,3,4,5,6,7, or 9.

[aseman]

Hi, I have tried 2 DKU-5 cables, and have edited the cfg file to state Com2, as this was the only free com port on my system according to Device Manager.

Still no luck. The only way this works for me is when someone brought round their JAF Unlocking box, used the COM port emulator and THEN using this software.

However, i dont own the box. Anyone else shed some light on this?

[Termy]

Hi, I have tried 2 DKU-5 cables, and have edited the cfg file to state Com2, as this was the only free com port on my system according to Device Manager.

Still no luck. The only way this works for me is when someone brought round their JAF Unlocking box, used the COM port emulator and THEN using this software.

However, i dont own the box. Anyone else shed some light on this?

If you have changed the com port in the cfg file to the same port that the cable is using in device manager then the cable isnt wired correctly.

You will need to check the pins and see if they are wired to the correct pins in the pop port connector and the USB plug.

Pins 1 & 8 - GND (Linked At POP Port/Phone End)
Pin 6 - RX
Pin 7 - TX

http://pinouts.ru/CellularPhones-Nok...p_pinout.shtml

Here is the schematic for the USB connection -

http://pinouts.ru/SerialPortsCables/...e_pinout.shtml

I am pretty sure all the info that is needed is there ??

[rdlbooth]

Hi,

Could someone advise if this release will work with a Nokia N91.

Thanks

Les

[Russell1]

Doesn't look like it will work in N91

Handsets supported in current version -

6630
6681
6680
n70
n71
n90

It wont work on any other handsets, like the N80, N73 etc etc.

[Termy]

Hi,

Could someone advise if this release will work with a Nokia N91.

Thanks

Les

I am not 100% certain m8, but try it and report back.

[Joe 9T]

Need some help here

I have two cables one is DKU-2 and the other is CA-53 anyone know if any of these cables will work with this software

[digi tec]

no

[gov400]

just got n80 locked on orange. Any option to unlock this. Orange say they cant give it to me

[Termy]

just got n80 locked on orange. Any option to unlock this. Orange say they cant give it to me

The only other option is via testpoint and service box m8. The service box costs approx 7,000 GBP, therefore it will be highly unlikely your avaerage market stall/sunday unlocker will have one.

[gov400]

i was looking on fleabay and about 20 sellers sell a softcalc for n80. I thought there were only calcs for the older nokias