Results 1 to 3 of 3

Thread: How to upload "Software into your Vantage"

  1. #1

    Join Date
    Jul 2005
    Posts
    82
    Thanks
    4
    Thanked 7 Times in 6 Posts

    How to upload "Software into your Vantage"

    1.Switch off the STB

    2.Connect "null modem" cable

    3.Bring up Winup Program

    4.Click RS232 Configuration

    5.Select right COM Port

    6.set parameter

    Bit/Set > 115200
    Data bit > 8
    Parity >no
    Stop bit >1
    Flow Control >no
    7. Click OK

    8.Click Upload to Receiver


    9.Click ::: button to find the software


    10.Select file type> hdp (dropdown)


    11. Open the software


    12.Click Start


    13.Switch on the STB --------wait until the STB rebooting.

  2. #2

    Join Date
    Jul 2005
    Posts
    82
    Thanks
    4
    Thanked 7 Times in 6 Posts
    Updating Vantage HD-7100

    Software updating using USB memory stick

    1-save the software "dlp file" into a USB memory stick.
    2- Connect the USB stick to USB socket.
    3- Bring up the menu "Multimedia - USB
    4- Select "dlp" file and press the red button on your remote control.
    5- The updating process starts.wait until the receiver reboots automatically.
    Last edited by T24; 11-12-2007 at 12:59 AM.

  3. #3
    Junior Member
    Join Date
    Dec 2004
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    @neotionbox

    hdp = E*u
    dlp = Original

    Regards Bilb

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •