thanks dude. but sadly for me i still don't get it why newcs isn't working for c+FR file?
nothing to do with "card reset failed" ? - scrap that. i can see it says the same when it's working with NL+ file without causing problems.
thanks dude. but sadly for me i still don't get it why newcs isn't working for c+FR file?
nothing to do with "card reset failed" ? - scrap that. i can see it says the same when it's working with NL+ file without causing problems.
Last edited by netjunkie; 09-12-2006 at 01:37 AM.
it's a pirate card thats why , they are not perfect
so you don't see a fix?
as i said i did test this file and card with my aston cam in my humax (going to be given to my dad) and it worked fine.
would a new file perhaps work in the future? or is my configuration f88ked?
only thing you can do is try every single emu out there and hope
for the best - have you tried gbox and scam ?
nothing else you can do unless the author improves the card files .
evocamd is giving much the same complaints:
/var/emu # ./evocamd -d
Connection to 127.0.0.1 failed with error -2, TCP/IP Port:10000
Connection to 127.0.0.1 failed with error -2, TCP/IP Port:10001
Autoupdate.Key: No such file or directory
Keylist.txt: No such file or directory
WARNING, No key file!
================================= ===========================
(compiled Mar 7 2006 09:51:48)
styled by TBT Team, Next Level version 2.04(dream-dbox2-Triple Dragon-re
================================= ===========================
[evocamd] Process id 1162
/var/emu # service 20DA index 0 Sec len 179 Info len 0 ...
, pids: 0x00A9|== ECM: CaID: 0x0100 -> CaPID: 0x0708 ProvID: 000089 ==|
|== ECM: CaID: 0x0100 -> CaPID: 0x0709 ProvID: 000080 ==|
|== ECM: CaID: 0x0100 -> CaPID: 0x070A ProvID: 000084 ==|
0x0074
[camd] try decoding...
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 89 found...
--------------------------------------------------------------
Missing or wrong key
Try caID: 100 ecm: 709
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 80 found...
--------------------------------------------------------------
Missing or wrong key
Try caID: 100 ecm: 70a
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 84 found...
--------------------------------------------------------------
Missing or wrong key
[camd] EMM thread started for :
|== EMM: CaID: 0x0100 -> CaPID: 0x00C2 ProvID: 000084 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C4 ProvID: 000081 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C5 ProvID: 000080 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C7 ProvID: 000088 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C8 ProvID: 000086 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C3 ProvID: 000085 ==|
|== EMM: CaID: 0x0500 -> CaPID: 0x0302 ProvID: 000000 ==|
|== EMM: CaID: 0x0500 -> CaPID: 0x0300 ProvID: 000000 ==|
/var/emu # Can't decode
Try caID: 100 ecm: 70a
Missing or wrong key
service 226B index 0 Sec len 16E Info len 3 ...
, pids: 0x00AA|== ECM: CaID: 0x0100 -> CaPID: 0x06AE ProvID: 000089 ==|
|== ECM: CaID: 0x0100 -> CaPID: 0x06AF ProvID: 000080 ==|
|== ECM: CaID: 0x0100 -> CaPID: 0x06B0 ProvID: 000084 ==|
0x0078
[camd] try decoding...
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 89 found...
--------------------------------------------------------------
Missing or wrong key
Try caID: 100 ecm: 6af
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 80 found...
--------------------------------------------------------------
Missing or wrong key
Try caID: 100 ecm: 6b0
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 84 found...
--------------------------------------------------------------
Missing or wrong key
[camd] EMM thread started for :
|== EMM: CaID: 0x0100 -> CaPID: 0x00C2 ProvID: 000084 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C4 ProvID: 000081 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C5 ProvID: 000080 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C7 ProvID: 000088 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C8 ProvID: 000086 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C3 ProvID: 000085 ==|
|== EMM: CaID: 0x0500 -> CaPID: 0x0302 ProvID: 000000 ==|
|== EMM: CaID: 0x0500 -> CaPID: 0x0300 ProvID: 000000 ==|
service 20DD index 0 Sec len 17C Info len 3 ...
, pids: 0x00A0|== ECM: CaID: 0x0100 -> CaPID: 0x06C2 ProvID: 000089 ==|
|== ECM: CaID: 0x0100 -> CaPID: 0x06C3 ProvID: 000080 ==|
|== ECM: CaID: 0x0100 -> CaPID: 0x06C4 ProvID: 000084 ==|
0x0050
[camd] try decoding...
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 89 found...
--------------------------------------------------------------
Missing or wrong key
Try caID: 100 ecm: 6c3
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 80 found...
--------------------------------------------------------------
Missing or wrong key
Try caID: 100 ecm: 6c4
--------------------------------------------------------------
[ newcamd ] No Network support for CaId 100 ProvID 84 found...
--------------------------------------------------------------
Missing or wrong key
[camd] EMM thread started for :
|== EMM: CaID: 0x0100 -> CaPID: 0x00C2 ProvID: 000084 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C4 ProvID: 000081 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C5 ProvID: 000080 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C7 ProvID: 000088 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C8 ProvID: 000086 ==|
|== EMM: CaID: 0x0100 -> CaPID: 0x00C3 ProvID: 000085 ==|
|== EMM: CaID: 0x0500 -> CaPID: 0x0302 ProvID: 000000 ==|
|== EMM: CaID: 0x0500 -> CaPID: 0x0300 ProvID: 000000 ==|
sorry we're out of sync. thanks again mate for all your trouble. last thing, does my setup look ok to you?
werd,
and over and out.
netjunkie
PS thank you again.
i know evo is just a client and fails to connect to your card on newcs .
gbox , scam and camd3 are all in one and your best shot .
good night and good luck
:( bbbbyyyyyyeeeeeeeeeeeeeeeee(falli ng through a black hole of emu fear).
right have used all emu's and combinations with cservers but no luck.
i have "card init fail" using CCcam and this worries me. (doesn't do that with the NL+ file)
mgcamd gives:
[mg0] RSA keys not found for id 89
[mg0] network can't decode
[mg0] pid 0x0690 failed to decode.
[mg0] RSA keys not found for id 80
[mg0] network can't decode
[mg0] pid 0x0691 failed to decode.
[mg0] RSA keys not found for id 84
[mg0] network can't decode
[mg0] pid 0x0692 failed to decode.
[mgcam] emm thread started
EMM: CaID: 0x0100 -> CaPID: 0x00C1 ProvID: 000000
EMM: CaID: 0x0100 -> CaPID: 0x00C2 ProvID: 000084
EMM: CaID: 0x0100 -> CaPID: 0x00C4 ProvID: 000081
EMM: CaID: 0x0100 -> CaPID: 0x00C5 ProvID: 000080
EMM: CaID: 0x0100 -> CaPID: 0x00C7 ProvID: 000088
EMM: CaID: 0x0100 -> CaPID: 0x00C8 ProvID: 000086
EMM: CaID: 0x0100 -> CaPID: 0x00C3 ProvID: 000085
*EMM: CaID: 0x0500 -> CaPID: 0x0302 ProvID: 000000
*EMM: CaID: 0x0500 -> CaPID: 0x0300 ProvID: 000000
Weird. anyone else know what card init fail errors may sometimes stem from. the card, emus and files are working but not the not with the C+fr file.
ask in the dreambox/k3 section , not many people with a k3 card
might read here .
anyway mgcamd is a client just as evocamd , it doesn't read
cards on it's own so this log is pointless , when newcs fails to init the card .
maybe someone has tried to run the card with gbox , scam , camd3
properly w/o newcs , i can't see any of these tests in your outputs .
cheers raul.
the log WAS with newcs - and seems to work as it should with both files. i am getting my head round some of this now - thanks to you and others.
thanks again mate.
werd,
netjunkie
what do you mean , is newcs initializing your french file now ?
your outputs point differently .
"w/o" should read without newcs , the emus i mentioned do not need
an external cardserver like newcs , as they handle the card by themselves .
Last edited by raul; 12-12-2006 at 01:34 PM.
you're thinking i'm not understanding you. it's probably my fault as i can write in quite a manic way.
ok...to clear up....
i do know w/o means without.
i do know what newcs does.
i do know what emu's like mgcamd and evocam do and that they need a server like newcs to run with. And i know there are others that are softcams like camd3 and gbox that do all the magic themselves.
and yes my k3 has always worked with gbox, Camd3, CCcam, mgcamd et al and their various partnerships or by them selves with the NL+ Dec file.
I can't get the C+Fr file working with any combo.
Newcs always started up fine (and the startup output was the same too) with both files - so i presumed newcs was not to blame and that it is working as it should with both files.
werd and thanks again mate,
netjunkie
Last edited by netjunkie; 12-12-2006 at 02:57 PM.
hopefully someone will find a way to get the card going .
there are many options in config files to experiment with and the
phoenix interface is one option as well .
i'd love to try these things out , unfortunately i do not have the card .
i do know though that pirate cards have failed before to work although
they have worked fine in CI-cams, but someone has always found a way
kick them in with a particular server/emu .
Bookmarks