Did you remember that negative longitude readings are West and positive Longitude = East?
Double check that you have the correct Latitude, and Longitude, by using a site like dishpointer.com, or other method.
If your Latitude, and especially Longitude, entries are correct, for your location, you can try a quick fix by altering your longitude reading, as this corrects for minor dish errors.
If the problem is with your dish/motor set up, you might want to correct it, by re-aligning your dish/motor, which means getting everything set t 0, then use your receiver, with the correct Latitude, and Longitude, entered, to move to a suitable satellite, like 0.8W, then physically adjust the dish/motor, to get the strongest signal, and then check your East/West satellites, to check the signal quality readings.