Results 1 to 16 of 16

Thread: intelsat 907 film4+1

  1. #1
    Verified Registered User
    Join Date
    Jan 2013
    Posts
    23
    Thanks
    18
    Thanked 8 Times in 4 Posts

    intelsat 907 film4+1

    hi. I am in Spain for a couple of months and have an Icecrypt S3500 to view tv witch works well but I have tried and tried to get flim4+1 but despite my best efforts cannot get it to work.

    I use Vpid7501 and Vpid7502 Video stream MPEG2 AND Audio stream MPEG1. The PCR is blank in Lyngsat and tracksat so tried 0/7501/7500 all without success. I did get a picture one morning using MPEG4 ? but next time i turned it on it did not work.

    I think everything must be right as if I change Vpid, Apid and PCR to other channel settings they work? I found one site that said the Video Stream was h264 but that is not an option during setup.

    Any help would be greatfully received.

    Thanking you in anticipation

    DENNIS

  2. #2
    Verified Registered User
    Join Date
    Jun 2014
    Posts
    70
    Thanks
    17
    Thanked 34 Times in 27 Posts
    Hi ddhbush best option is to download the latest firmware for your icecrypt from here as every 1 i have done has the latest channels and b*ss codes already preloaded into it.Can confirm it works on 3200/3250/1600/1600SE OK.

  3. #3
    Verified Registered User
    Join Date
    Jan 2013
    Posts
    23
    Thanks
    18
    Thanked 8 Times in 4 Posts
    Hi thanks for the reply. What file do you use as I have downloaded the latest firmware from both the icecrypt site and this site, at least it was the latest I could find! I understand it has to be the single tuner file.

    Regards

    Dennis

  4. #4
    Junior Member
    Join Date
    Oct 2017
    Posts
    8
    Thanks
    3
    Thanked 1 Time in 1 Post
    I'm struggling to get my Icecrypt S1600 to work on Intelsat 907. I've downloaded what I believe is the latest firmware from the FTP, S1600c_1.7.19.abs. I think I have the latest BISS keys but nothing seems to be dated. However, whilst the channels load ok, every time I select them they all come up stating they are scrambled.

    Is there anywhere else I have to define the Encryption as BISS?
    Any pointers to the latest keys would be appreciated?
    Many thanks
    Keith

  5. #5
    Verified Registered User
    Join Date
    Mar 2014
    Posts
    104
    Thanks
    53
    Thanked 32 Times in 23 Posts
    Quote Originally Posted by Keithb View Post
    I'm struggling to get my Icecrypt S1600 to work on Intelsat 907. I've downloaded what I believe is the latest firmware from the FTP, S1600c_1.7.19.abs. I think I have the latest BISS keys but nothing seems to be dated. However, whilst the channels load ok, every time I select them they all come up stating they are scrambled.

    Is there anywhere else I have to define the Encryption as BISS?
    Any pointers to the latest keys would be appreciated?
    Many thanks
    Keith
    Current BISS key starts D5 check this good luck

  6. #6
    Verified Registered User
    Join Date
    Jun 2014
    Posts
    70
    Thanks
    17
    Thanked 34 Times in 27 Posts
    hi keith b what is the state of your signal strength and quality as these are quite important,also do you have a 1600 or 1600SE(second edition) as the software is different for both,i have set 1 of each up for friends and they deffo work but you need decent signal strength and quality above 70% to get a stable picture,I always do all sw and bootloader when upgrading sw either by usb stick or direct from server by connecting box to lan and ftp upgrade,more info is needed to diagnose your problems.

  7. #7
    Junior Member
    Join Date
    Jan 2017
    Posts
    2
    Thanks
    2
    Thanked 2 Times in 1 Post
    Try this
    Attached Files Attached Files

  8. #8
    Junior Member
    Join Date
    Oct 2017
    Posts
    8
    Thanks
    3
    Thanked 1 Time in 1 Post
    I have a Icecrypt S1600chd. I purchased the box second hand and it works fine with the Astra feed.

    Just a few more details. I'm currently in the UK intending to take the set up out to Spain.
    I'm using a old sky dish that I've aligned to Intelsat 907, signal strength is 90% Quality 50%. ( when I go to Spain I will be using a 1m dish)
    I have tried two sets of codes one starts D5, the other AD.
    I've tried 2 software releases the one currently loaded states Current software Jan11 2017 11:33:17; Software latest update 1.7.19EMU

    What I don't understand is how the box knows to use bbc biss keys? all the other encryption keys such as Conax have figures loaded?
    Do I need to make any changes on the MCAS config screen? located below key edit.

    On setup for Intelsat there seems to be only 4 settings to change, Freq, SR and Vert/hor

    Any ideas would be appreciated.

    all the best
    Keith

  9. #9
    Verified Registered User
    Join Date
    Oct 2010
    Posts
    126
    Thanks
    27
    Thanked 50 Times in 29 Posts
    can you access the hidden menue ? and check the keys ?

  10. #10
    Verified Registered User
    Join Date
    Jun 2014
    Posts
    70
    Thanks
    17
    Thanked 34 Times in 27 Posts
    hi sig qual of 50% deffo too low ,in my experience you will not get a picture with that level,check the skew on lnb as its opposite to astra ,

  11. The Following User Says Thank You to villamarre For This Useful Post:

    Keithb (28-11-2017)

  12. #11
    Junior Member
    Join Date
    Oct 2017
    Posts
    8
    Thanks
    3
    Thanked 1 Time in 1 Post
    Yes, they stay loaded after rebooting as well.

  13. #12
    Junior Member
    Join Date
    Oct 2017
    Posts
    8
    Thanks
    3
    Thanked 1 Time in 1 Post
    Thanks Villamarre,

    I was a bit skeptical at first as my Astra unit works quite well at 50%. But I tweaked the dish a bit and got the quality up to 70% and the channels all came through.

    Thanks to all the others who responded as well.

    all the best
    Keith

  14. The Following User Says Thank You to Keithb For This Useful Post:

    icecrypt1600chd (11-03-2018)

  15. #13
    Junior Member
    Join Date
    Mar 2018
    Posts
    2
    Thanks
    2
    Thanked 0 Times in 0 Posts
    I have all BBC Channels , ITV 1, Channel 4, Channel 5 working but I can not get Film4 +1 to fully work. I only have sound but no image. My firmware is S1600c_1.7.05.abs. I can see on the thread above that there is a more updated one version S1600c_1.7.19.abs. I can not download it from the satellite FTP. Can anyone place a copy on the thread so I can download it and see if it work.
    Thanks

  16. #14
    V.I.P
    Join Date
    May 2010
    Posts
    368
    Thanks
    484
    Thanked 146 Times in 104 Posts
    Unzip
    Put on root of USB stick
    Upgrade Software and Channels.
    Hope it works OK
    Attached Files Attached Files

  17. The Following 2 Users Say Thank You to buck401 For This Useful Post:

    icecrypt1600chd (12-03-2018), manic01 (13-03-2018)

  18. #15
    Junior Member
    Join Date
    Mar 2018
    Posts
    2
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Many thanks buck401! Upgraded software and channels and now Film4 +1 and all other channels are working fine.

  19. #16
    Junior Member
    Join Date
    Sep 2018
    Posts
    18
    Thanks
    1
    Thanked 3 Times in 2 Posts
    what part of spain you in? i'm in cordoba region.

Similar Threads

  1. C4 and film4 problems
    By tench2 in forum SpiderBox 9000 HD
    Replies: 4
    Last Post: 18-06-2011, 05:21 PM
  2. Film4 Listings, 3/4/09//4/4/09
    By rabbi in forum Whats on - TV Guide
    Replies: 0
    Last Post: 03-04-2009, 11:01 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •