now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran
I can't go to 192.168.0.95:10002
How you find this code
now reboot your receiver. Hopefully fransat will now open, you can login into your oscam with 192.168.0.95:10002 to see what version your running. Hopefully its new enough to read the Fran
I can't go to 192.168.0.95:10002
How you find this code
Last edited by Nozahic; 19-09-2017 at 08:30 PM.
Good evening
Maybe it don't work because when I try to find the satellite and channel I change a lot of settings on the box , also I reset the box at factory setting
Maybe I can try to use one of my 2 other vu+ box and now I know what to do, it will be better. I can use also edidpate for do all the setting
What do you thing guys
I am worry I did some mistake on this box and it s for that the box don't work well
Regards
Last edited by Nozahic; 19-09-2017 at 07:54 PM.
Your latest image shows Common Interface, yet you're not using a CAM, try selecting Oscam and check that your card is the right way up, some readers have the chip facing upwards, some downward, try inserting it then press the Blue button and check if it's recognized.
Last edited by Mickha; 20-09-2017 at 08:10 AM.
Nozahic (20-09-2017)
Hi guys
No success at the moment and I can't go see witch oscam I have
I was thinking because my 3 box was done by a professional who settled everything for we can have multiple rooms Sky UK in our villa in Spain, maybe is for that my settle don't work.
Like you can see I am not so cleaver with that and maybe my box need to be reboot from start but I don't know how to do that and maybe it will be don't complicate for me.
I live near Bristol, do you know a company who can do all this job for me, I can go or post my box or maybe where I need to look in yellow page
Thank for your help to both of you.
3tv , witch car you used, the série 4 or the new one série 6
Regards
Last edited by Nozahic; 20-09-2017 at 10:51 PM.
using pc6 here
what error do you get when trying to log in with:
192.168.1.65:10002
Nozahic (21-09-2017)
Good morning
I try today and this time, something open when I tape 192.168.1.65:10002. I don't know why it open now, I try few time yesterday
Maybe because I turn on and off the box and left the box connect to internet. A update has been done
Below pic of what I have
Regards
I try me both card my old pc4 and also pc6
your oscam looks very old. Install a new version. rename the current oscam binary then save a more recent version in the same directory. look in usr/bin.
make sure your reader device is set to read from the correct card slot as well
Nozahic (22-09-2017)
Dear 3TV
That look complex to do, I can you explain more how to do that because I don't want to do mistake. Witch oscam I need ? It will be nice to know what to do step by step
Regards
I change the name of all the file oscam, by xxxxx binary. What I need to do with this file now ?
Where I find a new oscam, do you have a reference for that ? I need to put the new file oscam here also ?
Regards
I posted how to load a new Oscam in post 4, of this thread, and where to find them.
Nozahic (22-09-2017)
You might want to back up some files, on your PC, as loading a new Oscam will overwrite the old ones, and if running a line make sure you have that information saved.
What file I need to backup on my computer
Regards
Just back up your card information, or you'll have to type it again, and your CCcam.cfg file. if you're using a line, to open other channels.
It all depends on what you're using.
I put a new oscam, but still nothing
You can see on the pic below, what I did
Regards
looks like you have put the ipk file in the bin folder you haven't installed it
ftp into your usr/bin folder locate the file named oscam, rename it to oscam.bak
open the zip file from here - https://www.satpimps.co.uk/showthrea...l=1#post961436
it contains a oscam file, ftp the oscam file (not the zip file)put it in your usr/bin folder. change file permissions to 755 save and exit. reboot your reciever
Last edited by 3tv; 23-09-2017 at 03:38 PM.
Nozahic (23-09-2017)
Bookmarks