Hi guys
With all your old messages I manage to put back my box on, and it work fine, I can change channel without a problem.
My only concern it is for BFMBusiness channel, I still don’t have. If I look on lynsat BFMBusiness channel is 11596v ect.
On my tv is 11595v ect. I don’t know how to change that. Maybe you can help me.
In my tv room I have a normal Fransat box and I still have BFMBusiness on.
Regards
Alain
Try manually re-scanning it in, along with BFM Sport, and BFM Paris, on 11595 V 29950 DVB-S2 8PSK 2/3
Dear Mickha
Thank for your reply, I need to go to menu, options Channel, choice Manuelly re-scanning, I need to put info and just let the box to do ?
Regards
It depends on your image, go into the menu, settings, or setup, look for the tuner configuration/manual scan, enter the details and select the option to replace the current channels.
Always make sure you have a back up, of your channels, and bouquets, using dreamboxedit, or dreamset.
Originally Posted by Mickha
Dear Mickha
You will see below in pic what I didn’t still same problem, it look like I scan 11596 , I find BFMBusiness in the list, when I click on , screen black but if I press on info of this channel it s 11595 , it don’t take the channel change.
Any help guys, thank a lot .E34458A0-E281-4F9C-9AA6-34D2F58085DF.jpegA6139FCA-736F-4A6E-A2F0-CC4573B697D5.jpeg9846AF3E-F791-4204-9844-9A8950455EF1.jpeg0B1E7DF2-D62E-4071-85EA-AF6213D0599B.jpeg
You need to set the Clear Before Scan option to Yes, but it shouldn't matter whether the frequency is 11595, or 11596.
You might have multiple versions, of the channel, scanned in, check in the All Channels option, when in the channel selection you usually have the option to press the red button, on your remote, to view all channels.
3BEEB612-89DF-40EF-B2F2-8CF121FF6A4E.jpegFF0742DA-236C-49E8-9D98-4FF7EC0CA63E.jpeg4BD8AB0E-5635-406B-A445-2EE594704E6C.jpeg6C9E2381-BCB7-48C6-BED0-D5F4578F78B3.jpegBC692CB2-3B03-451A-A601-8987E6BD7354.jpegC256DDA6-BBCB-41A4-88B4-7D72116BDD7F.jpeg
I did what you ask, I take pic of all stage and still not channel, we still have the issue with 11596 it s scan but we i click on the black screen of BFMBusiness, they say 11595.
I try to press the red button when I had the results but nothing. It is very strange because BFMBusiness stop to work one day , but I still have this channel on a Fransat box downstairs, because I was thinking maybe they stop to be on
Regards
You need to exit the scan, then bring up your channel list, not the last scanned, but the full channel list, usually done by pressing the up/down arrows, on the centre of your remote.
When you have the full list up you should see options, in Open Black Hole you press the red button, for All channels.
Dear Mickha
I exit scan, I press up/down near ok button middle of the remote control, I had a list after I press the red button, I have a All channel but I find BFMBusiness but nothing, I don’t have option Open Black Hole
Regards
A5DE5780-41FA-4313-AF2B-B53448D9ED60.jpegFF41611C-83A6-4A4A-BB83-D63410044817.jpeg
Have you scrolled down, to the bottom of the page, in your second image?
As you can see, by the white bar, on the right hand side, you have quite few channels.
Since I don't use Openvix, or have a Fransat card, I doubt I can help you any further.
probably using a different unkown aes key. Since a few days ago fransat ultra HD was opening fine in oscam but not now, working fine if I use the ci+ cam though
Thank Mickha but no success, never mind if you can’t assist more. I just saw 3TV put a message, I will see if it can help because I think it have the Fransat card.
3TV, thank for reply and I hope you can help me. Don’t forget I am not a pro. I can’t understand it look like Fransat change something since few days, it is maybe for that I lost BFMBusiness tv, I lost only this Chanel few days ago, what I need to do exactly for have back this channel if it is possible. How I used the ci+ cam ?
Best regards
Alain
CI+ Cam, Common Interface, is the official Fransat cam module.
packccfransat-z.jpg
Your VU+ Duo has two Common Interface slots, that the CI+ Module can slide into.
If I buy a CI+ module, it will work straight away or I will need to do more thing because like you know guys I am not so cleaver with that.
Where I can buy a CI+ ? It need to be a special one ?
Regards
If I look on **** you have plenty options to buy
https://www.****.co.uk/bhp/ci-module
Don’t know witch one
fransat neotion ci+ cam
Dear 3TV, I need to order CI+ with a new card or I can used my card ?
Also if I buy that I will need to do a lot of change on my vu+ box ? Because like you know well I am not so good with the setting of the box.
If you think it will be too complicated, I will keep like that without BFMBusiness on my second TV, because I have all the other channels
Best regards
Alain
I think its image specific if they support ci+
you only need the cam, you will be limited with what you can do with recordings though when viewing using the ci+
Dear 3TV
Thank you for your explanation, I order a new one with the card, we will see when I have
I will need to do some update on my box or it will work fine straight away with all the update I did in the past with you and Mickha
Regards
2800EC5A0-8AF3-4BA9-9C8F-47FC40F6D38B.jpegCD27626D-AD38-4836-B0E6-CFA2BE84A26B.jpeg
I received today the ci+ Fransat with card , I put in slot 1 and put back the tv on but still no BFMBusiness on, I keep the other card in also , I need to move the other card ?
When I go to ci assignment, I can see slot 1 Fransat , if I press green, I have a message for say problem software, the box turn off and start again but no BFMBusiness
I will need help please from you guys
Regards
Alain
Posting Permissions
Reply With Quote
Bookmarks