Results 1 to 9 of 9

Thread: CCcam problem

  1. #1
    Junior Member
    Join Date
    Oct 2014
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    CCcam problem

    Hi Guys,

    I have a Duo 2 which I have just upgraded to Black Hole 3.03. Now CCcam is not clearing.
    I installed CCcam 2.3.0 for black Hole via manual install and sent my cccam.cfg to /var/etc.

    when I activate the cam on the blue button it says "no ecm info". I am certain that my cccam.cfg is correct.

    Any help would be greatly appreciated.

  2. #2
    Super Moderator DCG's Avatar
    Join Date
    Dec 2004
    Location
    just above the earth
    Posts
    1,622
    Thanks
    0
    Thanked 0 Times in 0 Posts
    is this moterised system fixed dish

    and which channels the more info the more help

  3. #3
    Junior Member
    Join Date
    Oct 2014
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    No, no motor.
    Sats: 28.E - 23.5E - 19.2E - 4.8E and 1 W spread over two fixed dishes.
    Four 4-1 diseqc switches into Vu+ Duo 2 with 2 twin Sat Tuners.

    Before upgrade everything worked perfectly with my older version of Black Hole (4 years old I guess)

    Thanks for your time.

  4. #4
    V.I.P
    Join Date
    Dec 2004
    Posts
    3,003
    Thanks
    6
    Thanked 16 Times in 9 Posts
    Using Filezilla navigate to the Var folder, etc sub folder, then right click on the CCcam.cfg file and select the View?edit option, to ensure that the original CCcam.cfg file was overwritten and that your data is correct.
    You might also want to try some of the Oscam files, for the VU+ Duo 2, I find they can work better than CCcam 230, and you can use the Softcam Concierge tool to compile your files:
    https://www.satpimps.co.uk/showthrea...-os******erver

  5. #5
    Junior Member
    Join Date
    Oct 2014
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks for the input.
    CCcam.cfg was successfully overwritten and CHMOD is set to 755. Cam shows as active but shows "ecm info not available"
    Unfortunately Oscan is no use on my particular system.

  6. #6
    V.I.P
    Join Date
    Dec 2004
    Posts
    3,003
    Thanks
    6
    Thanked 16 Times in 9 Posts
    Oscam works the same as CCcam, in most respects, it is just more recent.
    Are you getting the FTA, Free to Air, channels, so that we know you've configured the tuners correctly?
    Did you download your CCCam 230 from here?
    https://www.satpimps.co.uk/showthrea...s-(2013)-(2014)

    Try re-loading CCcam 230, and select it, using the blue button, then instead of overwriting the original CCcam.cfg file try using the View/Edit option and copy, and paste, your lines, into the CCcam.cfg file then save it.
    Also check that you are using the correct lines, and not some old, expired, ones.
    Last edited by Mickha; 03-05-2017 at 07:41 PM.

  7. #7
    Junior Member
    Join Date
    Oct 2014
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks again. I am travelling abroad from early tomorrow morning. I'll give your suggestions a try when I get back in 10 days time.

  8. #8
    Junior Member
    Join Date
    Oct 2014
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Before I left this morning I tried the cut and paste suggestion and it worked!
    Many thanks.
    However I am getting a lot of freezes and some channels still do not load or show any ecm info.
    Any advice?

  9. #9
    V.I.P
    Join Date
    Dec 2004
    Posts
    3,003
    Thanks
    6
    Thanked 16 Times in 9 Posts
    Check which channels are still available, e.g.
    https://www.satpimps.co.uk/showthrea...-working-today

    I would also load Oscam, you can load more than 1 emulator, and switch through them using the blue button.
    I found Oscam to be more stable than CCcam 230.

Similar Threads

  1. Problem with cccam. Please help!
    By oregon in forum AZBox HD Newbie Questions
    Replies: 55
    Last Post: 07-08-2010, 09:51 PM
  2. CCcam 2.1.1 problem
    By srbcrespo in forum AZBox HD Newbie Questions
    Replies: 6
    Last Post: 31-12-2009, 06:54 PM
  3. CCcam problem
    By Dogs1888 in forum AZBox Premium Discussion
    Replies: 5
    Last Post: 10-09-2009, 01:26 PM
  4. problem with cccam
    By paul01609 in forum AZBox HD Newbie Questions
    Replies: 7
    Last Post: 06-07-2009, 08:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •