Results 1 to 7 of 7

Thread: Technomate TM-5402 HD M3 - Sending E2 channel list to box

  1. #1
    V.I.P stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    294
    Thanks
    73
    Thanked 178 Times in 94 Posts

    Technomate TM-5402 HD M3 - Sending E2 channel list to box

    Driving me nuts here.

    I've put these on box via USB:
    Phantom Patch
    Channel list
    Sea lion

    Working fine, I can use cmd to ping the IP address 192.168.1.149 and getting a response.

    Using the below programs, I can't connect to the box to send my own preferred channel list (vhannibal):
    VUCC (using WebControlPort 80, Username root, password is blank) - also tried for password passwd, password, technomate
    DCC e2_142
    Filezilla

    Default port is 80 but on DCC, I'm getting the error message "Error 10057 in function Send Socket is not connected"
    On VUCC getting "Access violation at address 0052B206 in module 'VUCC.exe'. Read of address 00000000."
    Settings chosen in DCC are:
    Direct Crossover
    Active Image is set to "Imagine in the Flash"
    System is set to "FTP keep alive"

    Sea lion is working as are youtube and other online stuff, so definitely working on the network and the pinging of the box, thinking it must be the port DCC and VUCC are using.

    Any ideas guys
    Thanks

  2. #2
    V.I.P
    Join Date
    Jun 2008
    Posts
    542
    Thanks
    24
    Thanked 189 Times in 100 Posts
    Well I think I see your problem, your Technomate TM-5402 HD M3 is not a linux based receiver and is closed source. You can only use those tools with linux enigma based receivers.

  3. The Following 3 Users Say Thank You to kegnkiwi For This Useful Post:

    holmroad (06-01-2017), KARABANGA (05-01-2017), stevethejack (07-01-2017)

  4. #3
    Verified Registered User
    Join Date
    Aug 2016
    Posts
    342
    Thanks
    69
    Thanked 218 Times in 130 Posts
    Hi.. You need the TM800 HD box for E2 tools and not the 5402...You can use the built in function TM Online in the 5402 to download latest patches and channels lists etc....Regards.

  5. The Following User Says Thank You to KARABANGA For This Useful Post:

    holmroad (06-01-2017)

  6. #4
    V.I.P
    Join Date
    Jun 2008
    Posts
    542
    Thanks
    24
    Thanked 189 Times in 100 Posts
    Quote Originally Posted by KARABANGA View Post
    Hi.. You need the TM800 HD box for E2 tools and not the 5402...You can use the built in function TM Online in the 5402 to download latest patches and channels lists etc....Regards.
    Please do not buy the tm800, this was a one off box that used nxp chip and never worked correctly. There are loads of linux technomates that are much better than the tm800. There are some new ones coming out hopefully end of this month or early next month.

  7. The Following User Says Thank You to kegnkiwi For This Useful Post:

    KARABANGA (06-01-2017)

  8. #5
    Verified Registered User
    Join Date
    Aug 2016
    Posts
    342
    Thanks
    69
    Thanked 218 Times in 130 Posts
    Hi Thanks for advice..i had an TM800 second hand and could not get it to work properly so i binned it. The E2 boxes are good but need a lot of effort to get them right. If any new good ones come out please let us know.. Regards

  9. #6
    V.I.P stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    294
    Thanks
    73
    Thanked 178 Times in 94 Posts
    Cheers guys, Box is for a mate, with 28e, 19e & 13e. I downloaded latest channel list from Merlin, and deleted all other channels and frequencies (took ages), and then put remaining channels in favourites groups, mostly within 28e and uploaded channel list to box.

  10. #7
    V.I.P TheBadger's Avatar
    Join Date
    Dec 2004
    Posts
    1,137
    Thanks
    35
    Thanked 237 Times in 158 Posts
    I communicate with my 5402 M3 using STBDaemon. You run the latter on your computer before you try to communicate with with the former to specify your preferred shared folder. I haven't used the USB method for ages.

Similar Threads

  1. Technomate 5402/6800/6900 Channel List
    By satpaul in forum Tools & Editors
    Replies: 11
    Last Post: 08-01-2017, 04:04 PM
  2. TM 5402 - Updated UK channel list required
    By charlie696 in forum Tools & Editors
    Replies: 2
    Last Post: 26-04-2014, 09:34 AM
  3. Replies: 11
    Last Post: 19-02-2014, 07:43 PM
  4. Replies: 2
    Last Post: 18-08-2012, 08:45 AM
  5. Technomate 5402/6800/6900 Channel List
    By satpaul in forum 6000 series
    Replies: 0
    Last Post: 15-06-2011, 08:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •