Results 1 to 2 of 2

Thread: Advice on new motor

  1. #1
    Senior Member
    Join Date
    Dec 2004
    Thanked 21 Times in 16 Posts

    Advice on new motor

    I need a new motor for my 1.2mt dish in the garden, it must be the type where the dish sits on top of the motor (as the pole is only about 4.6ft high) rather than being attached under the motor. As far as I can see all the motors are the latter type I would like something like the Technomate 2600 but as stated it must be the correct type.

    Could anyone point me in the right direction?


    There is not much wrong with the motor being used but some teeth must have worn about where the Thor sat is and its difficult to find it.
    Last edited by Grahamc; 31-12-2016 at 01:13 PM.

  2.    Advert

  3. #2
    In the beeches
    Join Date
    Dec 2004
    Thanked 249 Times in 175 Posts
    I had the same requirement and was directed to the stab motors.

    They are about twice the price of standard diseqc motors and are very old designs now, but you can still obtain them.

    But be careful about the version you get. There are two sizes - HH100 & HH120. You will need the HH120 as it has a longer stub pole, and will probably be more sturdy for your 120cm dish.

  4. The Following User Says Thank You to Burnham For This Useful Post:

    Grahamc (31-12-2016)

Similar Threads

  1. Advice Fibo dish motor
    By muscles in forum Dish Discussions
    Replies: 21
    Last Post: 29-10-2011, 04:53 PM
  2. Advice on new lnb
    By bandit1 in forum LNB Discussions
    Replies: 7
    Last Post: 21-02-2010, 09:18 PM
  3. Motor with multi lnb holder. Advice please
    By veron57 in forum LNB Discussions
    Replies: 5
    Last Post: 17-01-2010, 12:30 AM
  4. Moteck Motor Motor play and Motor noise
    By Totally plucked in forum Dish Discussions
    Replies: 21
    Last Post: 03-04-2009, 08:13 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts