saintomer1866
as it can be seen on your shema it s a full 9 pin standard rs232, but you are never obliged to use all the pins some protocol use only 3 if i remember emit /receive / and clear to send..
best regards
saintomer1866
as it can be seen on your shema it s a full 9 pin standard rs232, but you are never obliged to use all the pins some protocol use only 3 if i remember emit /receive / and clear to send..
best regards
JOE.MADDISON (19-12-2016), saintomer1866 (19-12-2016)
well gibson i had same problem i upgraded and box would not fire up again, i put in usb and renamed file, after hours of trying pressing ok button, i then renamed file with the bin file included, first time it worked a treat, hope this helps. (donegalman)
Hi some info regarding RS232 method
1) RS232 cable connected to computer needs to have correct types of 9pins ie female to female or female to male
2) RS232 to USB needs correct 9 pin connection either male or female.
3) Correct loader for type of receiver - loader will contain setup for transferring file to receiver. For Spiderboxes you can use Hyper Terminal function if your PC has one or you should be able to get loader from manufacturers website.
4) Correct file to transfer to receiver.
Regards
if u use force upgrade rom make sure your usb stick is in fat
just for info here is the rs232 with jack and I must admit its neat.
Last edited by cosworth4x4; 04-02-2017 at 09:56 PM. Reason: Link removed as they sell sat gear , but ive added the photo.
Im surprised anyone is making a receiver with a rs232 port anymore , how many years ago did you see laptops or pc's with them.
or are they still used for factory flashing ?
Last edited by cosworth4x4; 04-02-2017 at 10:05 PM.
DCG (05-02-2017)
Yeah i Know , thats why i asked is it used for factory flashing , as we use usb on them.
DCG (05-02-2017)
Bookmarks