Results 1 to 5 of 5

Thread: loss of c----d.

  1. #1
    Member
    Join Date
    Nov 2013
    Location
    South east Spain
    Posts
    59
    Thanks
    0
    Thanked 0 Times in 0 Posts

    loss of c----d.

    Hi any help would be grateful, had an electric failure whilst out, and left me without any of the needed channels. I just can not resolve the problem, I run Hitechbox and S/box 6000, both will not open the said channels !!! my old Spider-box 7000 is opening a few here and there, so it is not a problem with the internet, all the three Sats I am viewing on -28.2 - 19'2 - 13- all free to air that I receive are opening fine. Leads from the router checked via my 7000 and seem fine. I feel it could be something the Active account. I feel I am missing something when it comes to activating the Active account because only 4 come up. -- 1 gs---d service 2 Ms---d service 3 Superiks service 4 Vshare service. But no c----d. Do hope I can get it sorted for Christmas.
    Merry Christmas to all who read this --- rioseco

  2. #2
    V.I.P Aldo's Avatar
    Join Date
    Dec 2004
    Posts
    6,063
    Thanks
    0
    Thanked 0 Times in 0 Posts
    You could try the following setup procedures for both receivers:

    https://www.satpimps.co.uk/showthrea...techBox-HB9000

    did you check this part part in the above setup procedure:

    Time to start MsCam
    Main Tile menu / Sat Installation / Installation / Conditional Access / 1111 / Net Client / Press red button Active Account / Down to MScamd service / OK button / OK button on Active code and enter your 10 digit code (Given by your supplier) / FAV button to save.

    for the Spiderbox 6000

    https://www.satpimps.co.uk/showthrea...iderbox-6000HD

    You could do a factory reset and check everything is OK as in the setup procedure above

  3. #3
    Member
    Join Date
    Nov 2013
    Location
    South east Spain
    Posts
    59
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks Aldo, done most of what I should but it looks like a factory reset. I'll hang on a little while hopefully

  4. #4
    V.I.P Aldo's Avatar
    Join Date
    Dec 2004
    Posts
    6,063
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by rioseco View Post
    Thanks Aldo, done most of what I should but it looks like a factory reset. I'll hang on a little while hopefully
    You could do a factory reset and load the latest patch again, in case the one installed has become corrupt.

  5. #5
    Member
    Join Date
    Nov 2013
    Location
    South east Spain
    Posts
    59
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi Aldo sorry for the late reply,but got onto BT Spain my internet provider they said all was OK from there end but said would delve a little further, and at 20-00 hours yesterday bingo my little box come back to life. But many thanks for your input. Take care and have a wonderful Festive season----rioseco

Similar Threads

  1. USB Driver Loss On PC.
    By gibson in forum Technomate
    Replies: 3
    Last Post: 16-11-2010, 11:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •