I tried all things which wrote at upwards but they didnt worked out what else that i could do?
reference this thread https://www.satpimps.co.uk/showthrea...ew-Hitech-9000
I tried all things which wrote at upwards but they didnt worked out what else that i could do?
reference this thread https://www.satpimps.co.uk/showthrea...ew-Hitech-9000
HiOriginally Posted by adem
Can you please explain better or start a new thread with what your problems is?
jb
Open File Fail! error
What's the error message I should do
Can not read USB Have loader?
Try a different USB Stick, have you unzipped/uncompressed the file to USB stick before trying to load into HB9000?
If so :
jbNo worry even if you corrupt your box...is always a Recovery trick...
Just Rename the Patch Software force_upgrade_rom and press is your remote control many time OKOKOKOKOK until you see your box start get the software back. (thanks to hosemaria)
Thanks for all your help. Worked a treat. New flash drive, force_rom_upgrade and my box is back to life.
Why was my post deleted
i am hoping someone can help me please, my new Hitechbox HB9000 has suddenly come up with a blue screen after installing patch file, "Download from usb, SW is Damage, pls upgrade new!" Is there anyway of fixing this. i have the backup, database and key data files saved to usb but it will not load it just displays this the message "Open File Fail!". Any help would be most appreciated.
Hi M8, instead of spamming the forum, maybe you should READ, and, follow, the info already posted in #Posts 2 & 3.
The info posted is telling you what you have to do to fix your box.
regards mobley2
Last edited by Mobley2; 01-04-2016 at 05:19 PM.
it wasnt deleted
they were all moved into a new thread of your very own, this thread is your thread now, the other will be locked to stop you posting in it
the info telling you how to repair your box has been posted in both threads now
here is the original thread you spammed
https://www.satpimps.co.uk/showthrea...ew-Hitech-9000
the repair procedure is as follows, using a new USB stick
Just Rename the Patch Software force_upgrade_rom and press is your remote control many time OKOKOKOKOK until you see your box start get the software back.
File Open Fail! error I have not tried them all I do what is thanks
Did you follow the guide, when loading your patch?
https://www.satpimps.co.uk/showthrea...techBox-HB9000
The latest patch is on the forum:
https://www.satpimps.co.uk/forumdisp...p?796-Firmware
You could try loading an earlier version, with a different USB stick.
If that fails, then hosemaria has posted a method of getting it to work, by re-naming the downloaded firmware, after it's been unzipped, on your PC, from HitechBox_2.1.21_2016.03.18.bin to force_upgrade_rom.
Load this file, onto your USB stick, and load it onto your receiver, the same way you loaded the patch, by repeatedly pressing the OK button, on your remote.
Have you tried this?
I'm sorry did not cause
I'm tired of trial
Fail Open File?
No logo
@adem
Try another USB Stick?
jb
three usb
I bought a new USB TV box gives an error
@ adem
Hi
I'm sorry but we are struggling to communicate here. Try asking your supplier if they can help you in case its faulty.
jb
ok
Posting Permissions
Reply With Quote
Bookmarks