oscam issues specifically for powervu

**starfox** · 13-01-2016, 10:46 AM

im using a Vu solo 2 box with open vix do i just download the patched open pli patched oscam then insert the soft cam here ....etc/tux box/config/oscam

**dOOds** · 13-01-2016, 11:13 AM

download oscam from plugin feed and just replace with the patched one..And keys yes go where you said bud.

Can you get 4W? As this is the easiest to open...stream relay must be "OFF" for 4W

**starfox** · 13-01-2016, 04:31 PM

Originally Posted by dOOds

download oscam from plugin feed and just replace with the patched one..And keys yes go where you said bud.

Can you get 4W? As this is the easiest to open...stream relay must be "OFF" for 4W

my line of site is 42 East to 45 West and using Catseyes channel list, bit confused on stream relay should be off

**dOOds** · 13-01-2016, 04:49 PM

when running oscam go to the webif of oscam..

Webif -> Config -> Stream Relay -> Mode
0 - disabled

So in your oscam.conf you will see your port..so enter in browser your box ip and :PORT

For example 192.444.222.1-192.444.222.255

192.444.222.1:8080 <<This being your port on the end

**Satcat** · 13-01-2016, 05:19 PM

I go into Webif > configuration, but I don't see Stream relay. Am I looking in the wrong place?

**starfox** · 13-01-2016, 05:30 PM

this is what it says in my oscam config file DOOds is this correct config file

#
# main configuration
#

[global]
nice = -1
WaitForCards = 1

# logging

logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
port = 988
aulow = 120
monlevel = 1

# web interface

[webif]
httpport = 8888
httpuser = myusername
httppwd = mypassword

# anti-cascading

[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log
denysamples = 9

# protocols

[newcamd]
key = 000102030405060708090A0B0C0D
port = 10000@0100:FFFFFF;10001@0200:FFF0 00,FFFF00;10002@0300:FFFFFF

[radegast]
port = 20000
user = user1
allowed = 192.168.0.0-192.168.255.255

[cs378x]
port = 30000@0100:FFFFFF;30001@0200:FFF0 00,FFFF00;30002@0300:FFFFFF

[cccam]
port = 40000
version = 1.2.3
build = 1234
reshare = 2

[gbox]
hostname = host.example.com
port = 50000
password = password1

[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300

[dvbapi]
enabled = 1
user = user1
socket = /tmp/camd.socket
#
## Tigretunisie
## www.swtools.biz
## http://www.stbsw.com/sat/oscam/
## http://www.stbsw.com/sat/keys/
## www.jachouf.com
## www.truman-support.com/vb/
## www.stbsw.com
## www.technical-features.com/vb/
## By Tigretunisie

**dOOds** · 13-01-2016, 07:07 PM

try this version of oscam satcat..it appears on this version..i found other versions its missing...

**starfox** · 13-01-2016, 07:09 PM

i used the PLI 4.0 but there's no config file in that rar file Doods.

**dOOds** · 13-01-2016, 07:10 PM

Try this conf starfox..replacing your ip range and change port

[global]
disablelog = 1
logfile = /dev/tty
preferlocalcards = 1

[cache]

[cs378x]
port = 99999

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
delayer = 60
user = dvbapiau
boxtype = dreambox

[webif]
httpport = 6666
httpallowed = ***.***.*.*-***.***.*.*

***echelon*** · 13-01-2016, 07:11 PM

more often than not the oscam downloads only contain the patched oscam, not the configs, perhaps that is why ?

it actually says the word emu in the title of each file, so its clearly just the emu , ie:- only oscam

**dOOds** · 13-01-2016, 07:13 PM

there wont be starfox...it's just the bin file..If you installed the normal oscam from pli feeds and then just replaced the bin file..the configs should be there already..just edit it.

**Satcat** · 13-01-2016, 07:34 PM

Originally Posted by dOOds

try this version of oscam satcat..it appears on this version..i found other versions its missing...

Excuse my ignorance Doods, but do I just overwrite my Oscam file in usr/softcam with this one?

**dOOds** · 13-01-2016, 07:37 PM

nah its a bin file satcat matey so overwrite bin in usr/bin

Then you need softcam.keys in etc/tuxbox/config/oscam

***echelon*** · 13-01-2016, 07:41 PM

depends which image is used as to where the bin file resides

BH USES usr/bin

OPENPLI USES usr/bin

OPENATV USES usr/bin

OPENVIX USES usr/softcams

others may possibly have a different folder, but its not usr/softcam

but yes, overwrite the existing bin file with the new file (patched file)

then chmod the file to 755 from 644, then restart E2

**starfox** · 13-01-2016, 07:52 PM

Originally Posted by dOOds

Try this conf starfox..replacing your ip range and change port

[global]
disablelog = 1
logfile = /dev/tty
preferlocalcards = 1

[cache]

[cs378x]
port = 99999

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
delayer = 60
user = dvbapiau
boxtype = dreambox

[webif]
httpport = 6666
httpallowed = ***.***.*.*-***.***.*.*

may be im doing this bit wrong ( httpallowed ) is this the ip of my VU solo boxs network as in 192.168.0.*

***echelon*** · 13-01-2016, 07:58 PM

Originally Posted by starfox

may be im doing this bit wrong ( httpallowed ) is this the ip of my VU solo boxs network as in 192.168.0.*

depends on the router and ip addressing, as they can and do use different ip ranges

for yours , its

192.168.0.0-192.168.255.255

**Satcat** · 13-01-2016, 08:08 PM

Thanks dOOds, but I'm still not clear where to put this "oscam" file. I'm on openvix. If I put it in usr/softcam it overwrites my oscam softcam file that is there, but you say not to do that. Also you call it a "bin file" but it's named "oscam" I'm very confused. (which isn't hard to do.

)

***echelon*** · 13-01-2016, 08:11 PM

its a bin file , a binary file

I have given you locations for where your current oscam file will be, vix uses usr/softcams

I would think doods assumed you were using one of the other three images (which use usr/bin for bin files like cccam and mgcamd and oscam), which is why with the vu its important for people to state which image they are using

you also said usr/softcam , whereas it actually has an s on the end , so usr/softcams

so ftp it over, overwrite the one in there (or do what I do and rename the existing as oscamOLD and then ftp the patched oscam over instead)

make sure the new file has the exact same name as the old file, renaming it if necessary

it may not say oscam , but may say oscam-latest or something similar

then chmod (change attributes) the new oscam file to 755 and then restart e2

**starfox** · 13-01-2016, 08:13 PM

Originally Posted by echelon

depends on the router and ip addressing, as they can and do use different ip ranges

for yours , its

192.168.0.0-192.168.255.255

im sure ive done every thing correctly , still not working for me i dought im not has Tech savvy has you ***s i appreciate you both helping .

**starfox** · 13-01-2016, 08:15 PM

Originally Posted by Satcat

Thanks dOOds, but I'm still not clear where to put this "oscam" file. I'm on openvix. If I put it in usr/softcam it overwrites my oscam softcam file that is there, but you say not to do that. Also you call it a "bin file" but it's named "oscam" I'm very confused. (which isn't hard to do.

)

ive got same problem