27.5 west guide

[lacierva]

init 4 Stops enigma2
init 3 Starts enigma2

thanks for the correction ozzsurf

[rickyblanes]

Can you give me the individual entries for 27w please and I will have a go

[lacierva]

Can you give me the individual entries for 27w please and I will have a go

pm sent ricky

[gbmitie]

I just tried this on solo2 with a backup image of openpli4, followed all the tutorial but can only see the channels epg, no sound or pic. Eror I get is Service invalid(Timeout reading PMT) I did a sat scan as well. Re-loaded lamedb as well.

Lost.

I take it these are still opening.

[lacierva]

no epg on 27.5w are you on the correct sat ?
all still open

[ozzsurf]

Service invalid Timeout reading PMT

lamedb file is wrong

example

4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4

if the bit in red is missing or not written correct

you get

Service invalid Timeout reading PMT

open lamedb
search for
4484:0cfdace7:1000:0001:25:0
check the p:BBC line

[lacierva]

Service invalid Timeout reading PMT

lamedb file is wrong

example

4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4

if the bit in red is missing or not written correct

you get

Service invalid Timeout reading PMT

open lamedb
search for
4484:0cfdace7:1000:0001:25:0
check the p:BBC line

ozz i got all open and still get service invalid timeout reading pmt message onscreen every time i change channel, it goes away with theexit buttton i think our friend may be missing the biss key part of the proccess

[ozzsurf]

heres the rest

init 4 stops enigma2
open lamedb
search for the top line for each channel
edit the bottom line for each channel
save
init 3 starts enigma2

4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4


4440:0cfdace7:1000:0001:25:0
BBC Two HD
p:BBC,c:0017d5,c:0317d5,c:050001,c:1217d6,f:4


4600:0cfdace7:1000:0001:25:0
BBC Three HD
p:BBC,c:001b59,c:031b59,c:050001,c:121b5a,f:4


46c0:0cfdace7:1000:0001:25:0
CBBC HD
p:BBC,c:001b59,c:031b59,c:050001,c:121b5a,f:4


44c8:0cfdace7:1000:0001:25:0
ITV HD
p:ITV,c:001839,c:031839,c:050001,c:12183a,f:4


4500:0cfdace7:1000:0001:25:0
Channel 4 HD
p:Channel 4 Broadcasting,c:00189d,c:03189d,c:050001,c:12189e,C:2600,f:4


4540:0cfdace7:1000:0001:25:0
Channel 5 HD
p:BBC,c:001901,c:031901,c:050001,c:121902,f:4

--------------------------------------

1100:0cfdace7:1000:0001:1:0
BBC News
p:BBC,c:0001f5,c:0101f6,c:0301f5,f:4


1200:0cfdace7:1000:0001:1:0
CBBC
p:BBC,c:00012d,c:01012e,c:03012d,f:4


1c00:0cfdace7:1000:0001:1:0
BBC Red Button
p:BBC,c:000385,c:0103b7,c:030385,C:2600,f:4


1240:0cfdace7:1000:0001:1:0
CBeebies
p:BBC,c:000191,c:010192,c:030191,f:4


1044:0cfdace7:1000:0001:1:0
BBC One England
p:BBC,c:000065,c:010066,c:03065f,f:4


107c:0cfdace7:1000:0001:1:0
BBC One Scotland
p:BBC,c:001005,c:011006,c:031005,f:4


107d:0cfdace7:1000:0001:1:0
BBC One Northern Ireland
p:BBC,c:0013ed,c:0113ee,c:0313ed,f:4


107e:0cfdace7:1000:0001:1:0
BBC One Wales
p:BBC,c:000c1d,c:010c1e,c:030c1d,f:4


1280:0cfdace7:1000:0001:1:0
BBC Parliament
p:BBC,c:000259,c:01025a,c:030259,f:4


4f80:0cfdace7:1000:0001:1:0
Film 4 +1
p:Channel 4,c:001d4d,c:011d4e,c:031d4d,c:050001,c:091d510101,c:121d4e,C:2600,f:4


10bf:0cfdace7:1000:0001:1:0
BBC Two England
p:BBC,c:0000c9,c:0100ca,c:0300c9,f:4


10c0:0cfdace7:1000:0001:1:0
BBC Three
p:BBC,c:00012d,c:01012e,c:03012d,f:4


11c0:0cfdace7:1000:0001:1:0
BBC Four
p:BBC,c:000191,c:010192,c:030191,f:4

[lacierva]

I just tried this on solo2 with a backup image of openpli4, followed all the tutorial but can only see the channels epg, no sound or pic. Eror I get is Service invalid(Timeout reading PMT) I did a sat scan as well. Re-loaded lamedb as well.

Lost.

I take it these are still opening.

have you loaded keys ?

[gbmitie]

thank you. I got it working but what I did was download a different oscam ymod and bingo got it working apart from film4 +1 and BBC3 HD.

going to bed now.

[viaccess2]

Hi thanks for that great tutorial
everything woking perfectly Thanks

[mickfarr]

Hi Ozzsurf and thanks for an excellent guide on setting this up. It's working perfectly for me here in Lanzarote now and I've also managed to get my EPG working for all the freesat channels and sky ones to.

My only problem is/was your lamedb file is missing a couple 100 channels and my working lamedb has now got all the channels plus the missing channels added from a rescan but now my BBC HD, ITV HD, (all HD) is missing the sound.

I've opened both files in notepad and searched for BBC ONE HD and both files look the same I think? Can you have a look at my file, I can test it out while I'm still here in Lanzarote and it maybe helpful to other users who are looking for a more complete list :-)

[ozzsurf]

all your p: lines are wrong bits missing
both sd and hd channels
do your lamedb again like this

https://www.satpimps.co.uk/showthrea...l=1#post942948

example

working
4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4


yours not working
4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0119ce,c:0319c9

and most of your 27 west lines have ,f:04
should be ,f:4

[mickfarr]

Ok, I found out notepad is not the best program to use to compare lines :-D I installed Notepad++ and was able to find and fix the HD entries and now everything is working here perfectly :-)

I've attached my lamedb file as it my come in useful for anyone else :-)

[mickfarr]

all your p: lines are wrong bits missing
both sd and hd channels
do your lamedb again like this

https://www.satpimps.co.uk/showthrea...l=1#post942948

example

working
4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4


yours not working
4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0119ce,c:0319c9

and most of your 27 west lines have ,f:04
should be ,f:4

Thanks for your quick reply, I did manage to find the errors and correct them using a previous post of your's. :-) You say my SD channels are incorrect as well? They're all working perfectly it was only the HD channels that weren't working?

Thanks again for this excellent thread, I'd never have got it to work with out all your hard work :-)

[lacierva]

Ok, I found out notepad is not the best program to use to compare lines :-D I installed Notepad++ and was able to find and fix the HD entries and now everything is working here perfectly :-)

I've attached my lamedb file as it my come in useful for anyone else :-)

nice one mickfarr keep up the good work, its important for us lot outside footprint , thanks for your lamedb file, do you have radio channels open ?

[mickfarr]

nice one mickfarr keep up the good work, its important for us lot outside footprint , thanks for your lamedb file, do you have radio channels open ?

Hi Lacierva, I actually removed the radio channels from my list and the ***** channels too. I'm heading off to Spain today and then I'll be back home in Ireland the following week so I won't be able to add them to that lamedb file. Maybe someone who has the radio channels may be able to create a new lamedb file and share it here. :-)

This extra info maybe helpful for others as well. I'm using the latest version of Openvix 3.2.0.30 on a VU+ Solo2 box and everything is working perfectly now. As long as everyone follows ozzsurf's guide exactly as he's written it should work perfectly :-)

[rickyblanes]

Does anyone have a auto cccam setup where the cam changes automatically from cccam to mgcamd. I had one installed but no idea where it has gone to..

[nml]

Try oscam-ymod in post 2 that should do what you want , I have tried autoswitch before and it didn't work very well for me.

Does anyone have a auto cccam setup where the cam changes automatically from cccam to mgcamd. I had one installed but no idea where it has gone to..

[Satcat]

I've just upgraded from 18-34 to Oscam ymod 18-56 and find I don't need the vix camscripts. Any ideas why that is? Are they build in to 18-56? I can't see them, but I'm probably looking in the wrong place.
Just curious.