tm5402 hd m2

[ajp]

hi I have the tm5402 hd m2 receiver. if it is left switched on over night it seems to crash and I have to power it off and on again before it will work. I think it is a software problem and wondered
if anyone has the latest software update for it. I have had a look but carn't seem to find anything.

This is the info I have s/w version 1.41p (jun 28 2014)

h/w 1.00

boot version 6.00

thanks in advance

Andrew

[manic01]

142 is latest

[ajp]

thanks m8

[holmroad]

thanks m8

Plus, just a 'suggestion' mate, make sure you load the latest patch etc using the currently 'preferred' method, i.e. including Factory reset(s))!

[ajp]

Plus, just a 'suggestion' mate, make sure you load the latest patch etc using the currently 'preferred' method, i.e. including Factory reset(s))!

I would loose all the pre-installed satellites and setting and then I would have to put them all back in wouldn't I

[manic01]

SAve your channel list, this will put all the sats and channels back on.

[ajp]

SAve your channel list, this will put all the sats and channels back on.

hi save to a memory stick I think that's what you mean

andrew

[manic01]

Yes.................

[holmroad]

Suggest as follows Andrew:-

1) Back up current Channel List to USB - also make a note of current satellite/stb settings, e.g. latitude/longtitude, USALS(or Diseq), etc etc
2) Factory Reset
3) Load patch 142P
4) Factory Reset
5) Power box off/on at back with power toggle switch
6) Reload Channel List from 1) above
7) Suggest load latest TM Softcam (unless already loaded on previously whilst on old patch)
8) Check all settings are back to 1) above
9) Off you go!

Let us know how it goes Andrew please!

[ajp]

Suggest as follows Andrew:-

1) Back up current Channel List to USB - also make a note of current satellite/stb settings, e.g. latitude/longtitude, USALS(or Diseq), etc etc
2) Factory Reset
3) Load patch 142P
4) Factory Reset
5) Power box off/on at back with power toggle switch
6) Reload Channel List from 1) above
7) Suggest load latest TM Softcam (unless already loaded on previously whilst on old patch)
8) Check all settings are back to 1) above
9) Off you go!

Let us know how it goes Andrew please!

hi holmroad thanks for info will try later as busy at the moment and will get back to

andrew

[ajp]

hi holmroad I have saved details from receiver to memory stick there where two files I saw. Would you have the latest file for tm softcam just in case I
need.

thanks

andrew

[manic01]

Its on the forum

[holmroad]

Here you go mate!!:respect-055:

[Barney]

Softcam keys dont get deleted with factory reset ,
neither does any of your saved Biss keys or anything in 8281 menu
just channel list only that gets wiped with factory reset .

[ajp]

thanks for the help will try it out and let you know

[holmroad]

Softcam keys dont get deleted with factory reset ,
neither does any of your saved Biss keys or anything in 8281 menu
just channel list only that gets wiped with factory reset .

Absolutely true Barney, only gave him latest softcam as he didnt say whether he'd used it before mate, so purely precautionary you understand!! lol!!

[marki]

Don't understand why this would only happen at night unless it's connected with the Wake and Sleep modes in Time Settings . Check that these are switched to off.If they are set to off then try setting them to get around the problem but I would've thought that if this was a bug then a lot of people would be shouting.Cheers.

[marki]

I did read,in another thread somewhere,about a similar problem,think it was on a TM 3/5.Instead of powering off then on,he just pressed the menu,epg or ok button.I can't remember and I can't find the thread!

[ajp]

hi marki I am having the same problem today I have noted your comments and will try what you say. If it continues it might need to be sent to technomate to look at.

regars andrew

I did read,in another thread somewhere,about a similar problem,think it was on a TM 3/5.Instead of powering off then on,he just pressed the menu,epg or ok button.I can't remember and I can't find the thread!

[ajp]

just a quick update have done a factory update and yet my receiver still freezes up when not used for a few hours, so there might be another problem and think I will need to contact technomate for help

regards

andrew