problems with new BH image

[sonic1]

Blue button >Yellow button > Green button

How much free space do you have in the flash ?

[vamas]

it is 80%. if need be I can always uninstall my XBMC.

thanks for your support ..... again....

[Mickha]

Have you checked your CCcam.cfg file has the correct details?
Start up FTP and go into the var folder and the etc sub folder, to locate CCcam.cfg.
The file has to match the name of the old one, CCcam.cfg, an easy way to do this is to transfer the CCcam.cfg file, from your receiver, to your desktop, using Filezilla, or other FTP program, change the details, then copy it back across, at which point you will be asked if you want to overwrite the old file.
An easier method is to right click, on the CCcam.cfg, select View/Edit, and paste your server details into it, then save the changes.

[vamas]

@mikcha
This is what i always do to put CCcam details and also re done to be 1005 sure and still same situation.

[Mickha]

You might want to start from scratch.
Load the latest Black Hole image again.
Load Echelons BH Cams, all 4 of them, in var. tmp folder:
https://www.satpimps.co.uk/showthrea...oe2-emus-(2013)
Activate them, and select 2.21.
Then load your CCcam.cfg file.
Scan in a few channels, manually, before attempting to load your channel list, and see if these work.

[Mickha]

@micha
upgrade of 2.1.1 how to do back up systems setting
present installed image 2.0. choose Menu / setup / system / customize / set up to expert
then back to menu / setup / software management / advanced options / Choose backup location / set hdd
Go back to previous menu and click on backup system settings.
Flash your box with Black Hole 2.1.1 image file and answer yes when the box will ask you if you want to restore your settings during wizard set up.

Thanks vamas, but you can also just use the VU+ Control Centre, for a quick backup, and restore, from your PC. I have already used your described methoed, in the past, as I installed a hard drive, from my PC, when I first got my VU+ Duo2.

[RATIUS]

vamas, did you have any success? i'm having the same issues :(
I've re installed from scratch twice, first time I FTP'd my existing CCcam 2.2.1 activated the cam as usual on my Uno and nothing working... Re flashed the receiver and tried the IPK file as linked in this thread the CAM installed on the receiver, I FTP'd my existing CCcam.config which overwrote the one in the receiver. When on a FTA channel if I press the blue button I get information regarding CAID, ECM etc, when on a encrypted channel all I get is ECM not available...
Can someone confirm if the permissions for the CCcam,config need to be set to anything in particular? The IPK file was at 644 (I am not using any cards)

[Mickha]

Just checked, on my receiver, by deleting all the information in the CCcam.cfg file, and that's the same message I get.
You don't need to do anything, to the CCcam.cfg file, regarding permissions, so long as cccam 2.21, or other version, is activated, and working, and the CCcam.cfg file is correct, then it should work.

Which notepad program are you using to create your CCcam.cfg file?
The easiest method is to use the one already in the Var folder, etc sub folder, and just edit it.
Right click, on the CCCam.cfg file, then click on View/Edit option.
Delete everything in it then copy, and paste, your lines, C: xxxxxx xxxxx xxxxx xxxxx
go to file and save, and it should work.

Also tested it with lines that no longer work, with the same ecm message, please check that your lines are correct and are still working.

[vamas]

@ratius
I had sorted all out with the help from Sonic1.
In the end it seems that line was not working but did start to work after contacting supplier.

[RATIUS]

Just checked, on my receiver, by deleting all the information in the CCcam.cfg file, and that's the same message I get.
You don't need to do anything, to the CCcam.cfg file, regarding permissions, so long as cccam 2.21, or other version, is activated, and working, and the CCcam.cfg file is correct, then it should work.

Which notepad program are you using to create your CCcam.cfg file?
The easiest method is to use the one already in the Var folder, etc sub folder, and just edit it.
Right click, on the CCCam.cfg file, then click on View/Edit option.
Delete everything in it then copy, and paste, your lines, C: xxxxxx xxxxx xxxxx xxxxx
go to file and save, and it should work.

Also tested it with lines that no longer work, with the same ecm message, please check that your lines are correct and are still working.

Mickha, I've been using MS notepad installed on win7 haven't had a any issues previously. I'm leaning towards a problem with my lines as I still couldn't get any joy even when rolling back, I'll check with my lines supplier tomorrow and report back. Thank you for your pointers

[RATIUS]

@ratius
I had sorted all out with the help from Sonic1.
In the end it seems that line was not working but did start to work after contacting supplier.

I think I've got a similar issue, I'm seeing my line supplier tomorrow lunch time

[echelon]

try notepad plus, it will show you any errors or characters not seen in ms notepad

[RATIUS]

try notepad plus, it will show you any errors or characters not seen in ms notepad

Can't see anything obvious after downloading notepad++
In the past whenever I've reflashed the receiver I've just FTP'd my existing CCcam.config overwriting the default and everything has just worked, I'm seeing my lines man tomorrow. I'll report back

[RATIUS]

All sorted... The lines were no longer valid, running with a new line.
Thank you for your assistance