icecrypt s1600 set up info

[cj1558]

i have just got this box and as i live in spain a friend has x2 dish astra 28.2 and intelsat 27.5
i connected up the box auto install it found astar but not intesat?
went into setting put it on intelsat 11495 44100 etc had sat signal but if i do red button single scan no channels found,
and if i diseqc it doesnt find both sats?
so i disconnected the astra still nojoy with entelsat.
also do i have to put on new firmware to access the hidden menus as it dont have any at the mo.
where does the cccam,do i have to use a progam the same as for dreambox eg dcc.
many thanks

[DJSat79]

For the Intelsat 907 mux...
Go to post by ColdAsICE "icecrypt s1600c hd patched firmware".
Download the zip file onto comupter. Please thanks ColdAsICE for this update.
Open file and put the file s1600c_1.6.27.abs onto memory stick.
Put memory stick into s1600
go to "system" and "upgrade by USB"
Once upgrade has finished, TP scan with parameters
ALL
TV+RADIO
MANUAL SCAN
NIT = OFF
PIDSEARCH = B**
Once loaded,All channels that are currently transmitting will be shown. (tested at 10:00GMT today)
Sorry I can't help on the Diseqc problem

[cj1558]

i have the ice s1600hd
i have put on the 1.6.28 firmware
i am in spain so i have ftp update and got the astra 28 and intelsat 907 channel lists
got the 907 working ok tried the sky input lines but it says failed login i think
do i use homecamd ccam etc
and on 1 i tried n: server name port user pass 01 02 ok ok cccmd
on the other i think it was ip port user and pass 01 02 ok ok homecamd
server config 192.168.001.102 i cant change then 10000 ok homecamd 1.0
cheers

[ColdAsICE]

homecamd is used for re-sharing your line within your home network to other recievers.
Its not for external lines thats why it has a fixed port etc
The protocol you need will depend on the server.
If its a Cline then use CCCamd etc a Cline will start with a "C" you mentioned using a "n" so it sounds like you have a Nline so use Newcamd as the protocol not CCCamd.
As it has a Nline apperance it might be the more popular MGcamd which you can also try.

[villamarre]

from my experience with icecrypt 3200 you only have to set diseqc to 1 for 28.2 and 2 for 907 and then scan each satellite and all channels form both appear in the order they have been scanned and installed,then you can organise the channels how you want in the menu,as i say i have done this successfully on icecrypy3200s but i'm sure the 1600 uses same menu structure.