Can we use with smartbox 6000 this channel list:
Code:http://www.vhannibal.net/
Can we use with smartbox 6000 this channel list:
Code:http://www.vhannibal.net/
Afraid not vhannibal's lists are for Enigma1 and Enigma2 receivers only the Smart/Spider is a closed source receiver
And is there a chance to open with channel editor and than save to convert for spider?
use the bespoke spiderbox 6000 channel editor when using a spiderbox 6000
(with spiderbox 6000 channel files only , not vhannibals or catseyes)
what frequency supper tennis on hotbird
Please do not ****** some one else's thread, this one is entitled " Channel list ", not individual channels, and the frequency that you are looking for is:Originally Posted by tomheaton1510
Super Tennis: 12476 H 29900 3/4
Easier to have a look yourself for it on a frequency chart site, (regular updates) *********, Lyngsat, Flysat.
jb
Ha Aldo pipped me >
Echelon I adedd channel list with usb which I make with channel editor but satellite positions I have to add again manually! How to add it with motorised channel list! I tried one motorised compass list but that didnt work for me!
I dont have a spiderbox 6000 so cannot answer practical questions like yours about it , never in my life have I posted mentioning owning a 6000 because I havent got one !
but I do not believe you can alter E2 channel lists for other boxes like the spiderbox 6000 which is why I recommended using the tool that is the spiderbox 6000 channel editor seeing as its has been talked about many times on this forum
as an admin I read a lot of stuff on various boxes on here or elsewhere , I know what concorde looks like but cannot fly it
When you add a new channel list with Diseq, you have to tick all the Sats that you wish to receive channels from, then you have to move the dish to each Sat location and then store it, with USAL's you input the co-ordinates for your location, setup on 1 west, and then the motor should go to the Sats that you have selected.
and further more you could have got this info from the following link, in Satellite Setup:
https://www.satpimps.co.uk/showthrea...iderbox-6000HD
Last edited by Aldo; 12-06-2014 at 09:50 PM.
With this part I'm having problems how to add latitude in fact how to find which is my latitude, I tried but without success. Go to Menu / Sat Settings, scroll down the left hand list and click OK to select all the Sats you want to scan, this will give them a tick.
Right arrow across, scroll down to Motor, right arrow to select ‘Diseq/Usals’, OK, Scroll down to Mode, select Drive to Satellite, scroll down to Set Location, OK, Scroll down Set Long then Lat then save, scroll to Go ‘Save Data and run’ thats it.
So I added manually sats and add each sat position manually but which are not very precise positions and some sats doesn't work clear! If I backup my list and re edit it with channel editor channel positions in list do I loose motor positions?
" If I backup my list and re edit it with channel editor channel positions in list do I loose motor positions? "
No you should not lose your Sat Positions, to use USAL's you would have to find the Latitude & Longitude for Country or City where you live and enter in the top box, a Negative longitude reading goes in Spiderbox 6000 Menu as West(W)
@Aldo to use USAL's you would have to find the Latitude & Longitude for Country or City where you live and enter in the top box, a Negative longitude reading goes in Spiderbox 6000 Menu as West(W)
I know this I tried with dishpointer webste and DP Maps App but without success! I dont know to read latitude from web and to enter in spiderbox because there have more numbers. Make a simple for me if you can!?
reduce the figures until you have the nearest one with the correct amount of numbers , so round it up or down and reduce the decimal places accordingly
so 52.45678 -= 52.46 to 2 decimal places
its not that critical so 52.5 or 52.4 or 52.45 would work , you are over thinking the process , so K.I.S.S. needs to be used
@echelon
I think that what the OP is saying is when he puts his Country & City into Dishpointer, and I believe he lives in Prishtina, Kosovo. He gets the following info:
Address: Prishtina, Kosovo
Latitude: 42.6578°
Longitude: 21.1533°
Satellite: 91W GALAXY 17 (G-17) | NIMIQ 1 | NIMIQ 2
Elevation: -24.0°
Azimuth (true): 105.4°
Azimuth (magn.): 101.3°
however there is no North, South, East or West indication.
a pity he didnt actually mention this city , which is clearly in the northern hemisphere (so N for North for Latitude) and is East of London ( so E for Eastern longitude )
all he needs to do now is round up or down to the correct number of places although it wont matter much if its less than half a degree so he can basically "lose" the extra digits
If this are cordinates for astra 28.2 how do you enter latitude and longitude?
I mean until which number is correct?
Your Location Satellite Data Dish Setup Data
Latitude: 42.6578°
Longitude: 21.1533°
Name: 28.2E ASTRA 1N | ASTRA 2A | ASTRA 2D | ASTRA 2F
Distance: 37765km
Elevation: 40.2°
Azimuth (true): 169.7°
Azimuth (magn.): 165.5°
LNB Skew [?]: -0.1°
42.6 North & 21.1 East m8
Posting Permissions
Reply With Quote
Bookmarks