New patch for Spiderbox/Smartbox HD6000 09/04/2014

[blackdevil]

New patch for Spiderbox/Smartbox HD6000 09/04/2014 :

https://www.satpimps.co.uk/showthrea...tch-09-04-2014

[stokesparkie]

Hi I know you might say I sound stupid but could you explain what home sharing is and if there is a guide for it?

I have searched in the forum but cant find an answer.

Is it like what apple use for there devices

Thanks

[Roadrunner]

It just allows you to share your card to your other box in your home. If you had two spiders at home and only one sub card then you could use it in both boxes at the same time. You just select it from the list of cards. On the local machine (the one with the card) its in the line called MyCard, on the other (the one you wish to connect to the card) it will be on one of the other lines. Just select it to connect to that card also. In short it lets you have same channels on both machines with a card in only one of them.

[echelon]

Hi I know you might say I sound stupid but could you explain what home sharing is and if there is a guide for it?

I have searched in the forum but cant find an answer.

Is it like what apple use for there devices

Thanks

formerly known as homeplus on the older spiderboxes

like in this thread https://www.satpimps.co.uk/showthrea...me-net-sharing

https://www.satpimps.co.uk/showthrea...rd-with-others

[iguana]

its a shame the new software dosent recognised my Tivusat card Nagravision card
in Homeshare its displays unknown card
Tivusat cards dosent need paring they work in other boxes, but for some reason not
work in this box. i hope they fix the issue.
thanks

[blackdevil]

its a shame the new software dosent recognised my Tivusat card Nagravision card
in Homeshare its displays unknown card
Tivusat cards dosent need paring they work in other boxes, but for some reason not
work in this box. i hope they fix the issue.
thanks

Do you insert card with chip down ?

[iguana]

Hi yes inserted with chip down but didn't work
Thanks

[Sim7alb]

I loaded the last patch but iks not get conected as yet . Youtube ,rds etc work fine . Any idea what's going on mates ?

[glyndwr]

Hi,

I am in the same position,

dsaved my channel data, done factory reset, uploaded new patch, done another factory reset, on receiver restarting, set up wired network, accessed network menu tried to connect to iks, nothing, message stays on connecting....

any ideas of how to do this correctly, im sure what i have done is procedurally correct, but if i have missed something, please advise.

Many thanks.

I loaded the last patch but iks not get conected as yet . Youtube ,rds etc work fine . Any idea what's going on mates ?

[Aldo]

It does not state that you have to do 2 factory resets in the details included with the latest patch:

Instructions :
First save your channel list
Go to Network settings & select wired option
Go to Network & turn CCcam, Newcamd to off
Load patch
Factory Settings
Load your channel list

[glyndwr]

Hi Aldo,

followed those instructions exactly as written, apart from the loading of the saved channel list, thought i would check the connection status first, the box connects to the net ok via youtube etc.... but in IKS status always stays connecting

Any other ideas what i could try,

Many thanks, Anthony.

It does not state that you have to do 2 factory resets in the details included with the latest patch:

Instructions :
First save your channel list
Go to Network settings & select wired option
Go to Network & turn CCcam, Newcamd to off
Load patch
Factory Settings
Load your channel list

[Roadrunner]

Try and do a full power cycle. Turn off at the socket, and plug it back in, You can also try Reboot in the menu.

[glyndwr]

OK i tried the power off too, still the same.

One thing i just noticed, the new patch i have downloaded from here is 3.7mb in size, and when i backed up my data that file size was 8.2mb. That doesnt sound right to me

Also, after loading the patch, and a factory reset after the loading of the patch, when i go into network, and the area for additional sealions (not iks) my old sealion data is still there but shaded, not applied. Im thinking if i have completed a factory reset all mu old data should be erased.... am i dot dong a full factory reset, or is this normal?

Any other ideas.....

thanks

[shellman]

Could someone please clarify - do we HAVE to re-patch with the new patch dated 09/04 to get IKS channels back ? Some of the above posts imply that they still do not clear even if this is done. Is anyone actually clearing IKS at the moment, or is it a case of sitting tight with either the old or new patch ?

[Mickha]

If you don't load the new patch you will never know. Others have reported, on this forum, that the new patch is working.
I advise you load the new patch then report back if it is working, or not.

[glyndwr]

Thanks Mickha,

i have loaded the patch, not sure if i completed the process correctly although followed instructions, but having issues stuck in the connecting mode whilst trying to connect to iks

to have the channels back you must have to be able to connect to the iks server, something some of us are havinbg trouble doing.

I did join the vas*** form earlier to see if there was someting i havent done or something new i had to do, joined ok but have to donate £50 or something like that to get to VIP status to see anything worthwhile (eve if it is then actually wortwhile) but as my box is only new since xmas, im abit cautious to do that to be honest.

[Mickha]

Try rebooting your router, and receiver, then check to see if it is connecting.

[2colby]

I must admit that I was chewing the carpet after loading the patch, until it finally connected about 90 minutes later.

[Sim7alb]

Nothing come as yet. Rebooting did nothing better either. Crazy box

[blackdevil]

Nothing come as yet. Rebooting did nothing better either. Crazy box

Are you sure you have downloaded latest patch succesfully ?
Go Menu - System Info and check date if it is Apr 09 2014