New BH 2.09 image but solo crashes with frozen picture

[Jules]

Hi Guys, I have installed the latest BH image. At first everything worked but after a while I still have sound but frozen picture.
Then I have to reset the box to get it going again.
Has anyone else had this problem please?

Thanks.
Regards,
Jules.

[cosworth4x4]

7 min that didnt work for long .

https://www.satpimps.co.uk/showthrea...-with-Conax-CI


have you tried a fta channel , do you get the same problem then.

[Jules]

I'm on FTA now and will see what happens.
Thanks M8

[Jules]

Seems to be OK on FTA.
This is odd. What do you think?

Cheers,
Jules.

[Jules]

Spoke too soon, just frozen again. AARRRRGGG!!

[cosworth4x4]

try removing the cam and card and retest on fta.

[DCG]

does it not work in the card slot using cccamd

[Jules]

Thanks Guys,
I will try removing cam and card and see what happens.
I need the cam to watch TV2 Premium, but I can test till I need to watch it.

Not sure what the answer is if it works without CI used?

Regards,
Jules.

[clipper]

there is a update for the BH 2.09 image to 209.1
that you can do the update with the remote
menu>set up>ok>software management>ok>software update>ok
and update the image with new drivers and a blind scan etc:
this could be worth a try to be sure there is'nt a glitch in the image

[Jules]

Thanks Clipper, I already did upgraded when I installed it.
It's just frozen again without the cam in slot.
Cheers,
Jules.

[clipper]

i dont know if this will help but it's worth a try
i and others have had similar problems to your's
and if you've test other images before
flashing the latest bh image i was told to flash
a earlier bh image version first and then flash
the latest version after it and it cleared all my
problems, take a look at this thread about the bh image

https://www.satpimps.co.uk/showthrea...ht=#post900220

[Jules]

Thanks Clipper, worth a try.

Regards,
Jules

[Jules]

Hi Guys,
a quick update. I installed open PLI V4 and all OK for a few hours, switched to ITV HD, frozen again.

Cheers, frustrated Jules.

[cosworth4x4]

so i think you ruled out the image the cam and card , when if freezes how long does it stay that way , long enough for you see see if you are loosing signal.
maybe worth a quick look at the cable from lnb just incase.

[clipper]

i would give the box a good clear out first
and flash the vu official operating image on
it as it came when it first left the factory

from here:--

http://code.vuplus.com/

look in the boxes on the left of the panel
for Images 2.1 choose the correct one for your model
and then re flash a image of your choice and see if this
clears the problem your having

[Jules]

Thanks fellas, I notice now when it freezes after about 2 mins it works again without resetting.
Thanks for the idea of reflashing with VU+ image and start again. I think thats my next step.

I'll keep you informed.

Regards,
Jules.

[Jules]

Do you think I should flash a bootloader again before I flash original image? If so, which one?

Cheers,
Jules

[clipper]

Do you think I should flash a bootloader again before I flash original image? If so, which one?

Cheers,
Jules

********************************* *****
it wont do any harm but i would just flash
one of the new images, they have all the latest
drivers and updates added, as i said earlier to be sure
i would flash the official software first that way you
know the box has a clean start and it will clear any
glitches etc that you now have.

[Jules]

Thanks Clipper:respect-050:

[Jules]

No go Guys,
I tried flashing VU+ original image then open ATV image. An hour later crashed again.
I have now removed the CI cam again as a last resort to see if it crashes again over the next few hours.

I will keep you informed.
Thanks Guys.
Regards,
Jules.