Results 1 to 9 of 9

Thread: saving channel lists and settings

  1. #1
    V.I.P heyho's Avatar
    Join Date
    Dec 2013
    Posts
    351
    Thanks
    0
    Thanked 0 Times in 0 Posts

    saving channel lists and settings

    I'm quite enjoying using the channel editor and uploading the file to the Spiderbox. But any file initially created by the channel editor will lose any satellite settings that you may have (which can be a pain if you are not using Usals). Ok I know that if i subsequently save this file and do any editing using channel editor the settings will be there.

    Is there anyway of having two seperate files i.e. one just for the 1.2 'position' settings and then when you upload a channel list you can add this.

  2. #2
    Verified Registered User
    Join Date
    Dec 2004
    Posts
    141
    Thanks
    0
    Thanked 0 Times in 0 Posts
    We are working on it mate, it is extremely difficult and very time consuming to reverse engineer the SSU file format for sat settings area, without any help from anyone.

    When you save the SSU using the editor it currently sets all the sat settings to the boxes factory default values, so that's why you see this problem, but hopefully this will change in the next release of the editor

    Maybe only the satellites "Auto Enabled" and LNB 9750/10600 / 22k tone settings, the Motor settings are very complex

  3. #3
    V.I.P heyho's Avatar
    Join Date
    Dec 2013
    Posts
    351
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Cheers Blueking. I think most people in the know appreciate your efforts and the time things like this can take.

  4. #4
    Senior Member
    Join Date
    Jun 2013
    Location
    Tipperary South
    Posts
    161
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Be aware that our friend Heyho has a tendency to test the patience and prolong the pain anyway happy Valiers to all it's my hope that all on our forum were smiling this morning.

  5. #5
    V.I.P heyho's Avatar
    Join Date
    Dec 2013
    Posts
    351
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Knacker View Post
    Be aware that our friend Heyho has a tendency to test the patience and prolong the pain anyway happy Valiers to all it's my hope that all on our forum were smiling this morning.
    Cheeky beggar. I will let you know a faulty brand new out of the box motor for your first setup would test anyones patience :nopity:

  6. #6
    V.I.P jimihendrix's Avatar
    Join Date
    Nov 2006
    Location
    Bridlington
    Posts
    104
    Thanks
    0
    Thanked 0 Times in 0 Posts
    DiseqC was at one time the only way to move our motors, however the clever people at STAB came up with USALS and what's more we get it for free!!!
    My question is when USALS which is both accurate and repeatable and also so very simple to use why on Earth use DiseqC?
    Ok I know some member MIGHT have very old motors which are not USALS compatible BUT with a CORRECTLY installed and setup motorized system DiseqC is something of a throwback.
    STAB the originators of USALS claim with a correctly set up motor and dish, USALS can locate a given satellite within 2 mtrs of it's actual position, with that sort of accuracy who needs DiseqC?
    I know if your setup is not "spot on" then you can possibly squeeze a few extra percent of signal and quality readings but this is an installation problem and not a USALS problem, you would be better off getting your dish realigned then you can swap channel lists without the fuss of moving east or west and trying to locate the satellite your looking for.
    It would be great for the very few who really need DiseqC for motor control that it could be saved within the channel editor but to me it seems a disproportionate amount of time and effort will have to go into this feature which in truth is of little value to the majority of users.

    This this from the STAB site :

    But what is the USALS system (Universal Satellite Automatic Location System)?
    It is a calculation system processed by STAB, and given free to all manufacturers of sat receivers or PC cards, which enables the receiver to calculate the position of all satellites in orbit with a precision lower than 1 meter with reference to the place of installation. All this in a completely automatic mode and with no specific technical knowledge required, either during installation or use.
    Last edited by jimihendrix; 15-02-2014 at 12:47 PM.

  7. #7
    V.I.P jimihendrix's Avatar
    Join Date
    Nov 2006
    Location
    Bridlington
    Posts
    104
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by heyho View Post
    Cheeky beggar. I will let you know a faulty brand new out of the box motor for your first setup would test anyones patience :nopity:
    I've had a faulty motor which taught me a lesson, now I connect just the motor (no dish) to the receiver indoors and do a quick test before installing it outside.
    Ok probably unnecessary as I've only had one faulty motor in 10 years BUT the thought of mounting the dish and motor outside then having to take it down again......

  8. #8
    Senior Member
    Join Date
    Jun 2013
    Location
    Tipperary South
    Posts
    161
    Thanks
    0
    Thanked 0 Times in 0 Posts
    All in good fun Heyho,I must confess I follow your posts to find info that I am not to bright at and would have felt like a dummy trying to ask in a way that makes me less than a dummy and I end up more confused than if I had asked the question in the first place,but we have good understanding and patient people on our site that make it easier to be a"D"regards K

  9. #9
    V.I.P jimihendrix's Avatar
    Join Date
    Nov 2006
    Location
    Bridlington
    Posts
    104
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Knacker View Post
    All in good fun Heyho,I must confess I follow your posts to find info that I am not to bright at and would have felt like a dummy trying to ask in a way that makes me less than a dummy and I end up more confused than if I had asked the question in the first place,but we have good understanding and patient people on our site that make it easier to be a"D"regards K
    Believe me we all had to start somewhere, I well remember my first steps and it was a little easier for me having worked in the electronics industry BUT then we did not have the luxury of USB download either. EVERYTHING had to be done by connecting your PC (not even a laptop) to the satellite receiver and using the RS232 download method with a Null Modem cable.
    I remember asking some simple questions but there were helpful members willing to answer my stupid questions and soon I got the hang of things.
    So dont be afraid of asking, someone will reply but if the reply does correct your problem then post back and others who might be afraid of asking can learn from your experience.

Similar Threads

  1. Saving motor settings
    By kirit in forum Vu+ Solo2 Help Section
    Replies: 0
    Last Post: 30-04-2013, 02:57 PM
  2. saving settings
    By maggie in forum SpiderBox 9000 HD
    Replies: 1
    Last Post: 24-01-2011, 11:45 PM
  3. Saving Channel Lists
    By santa in forum SpiderBox 9000 HD
    Replies: 0
    Last Post: 10-12-2010, 09:37 PM
  4. Saving settings from DM800?
    By Sawdust in forum Vu+ Duo Help Section
    Replies: 2
    Last Post: 12-06-2010, 03:55 PM
  5. saving channel lists
    By baddog in forum Technomate
    Replies: 2
    Last Post: 20-11-2008, 01:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •