Results 1 to 1 of 1

Thread: Recovery instructions for HD6000

  1. #1
    V.I.P blackdevil's Avatar
    Join Date
    Jun 2013
    Posts
    690
    Thanks
    258
    Thanked 5,893 Times in 763 Posts

    Recovery instructions for HD6000

    Recover STB using RS232

    Instructions :

    Unpack the Hyperterminal zip file below using 7zip or Winzip or Bandizip after downloading it

    Unpack the repair firmware zip file below using 7zip or Winzip or Bandizip after downloading it


    Steps:-

    01. Install HyperTerminal

    Code:
    https://skydrive.live.com/?cid=b98f3d302358df4a&resid=B98F3D302358DF4A!222&id=B98F3D302358DF4A!222
    Code:
    (if not exists in your PC's windows: Start****All Programs****Accessories****Communications****HyperTerminal)
    02. Turn off STB
    03. Connect RS232 Cable to STB and PC and execute HyperTerminal (use a fully wired null modem cable)
    04. Make new connection - make name
    05. Select Com port
    06. Set Speed and other (115200 – 8Bit – No parity – 1 StopBit – No HW control)
    07. Press space on HyperTerminal every 0.5 seconds (half a second) from the time when turn on STB,
    08. When HyperTerminal shows the below picture on PC, then stop pressing space.
    09. It shows to ask to select one of menu from 3 menus.
    10. Select “2. Upgrade Application with Xmodem”
    11. Select menu->Transfer->Send File in HyperTerminal
    12. Set protocol Xmodem and select (not type)
    Code:
    navi_s_326su.flash.gz.gro.stp
    and press Send button

    read these threads for hints and links about using the correct tools and leads and windows

    https://www.satpimps.co.uk/showthrea...Com-port-setup

    https://www.satpimps.co.uk/showthrea...king-up-a-lot-

    https://www.satpimps.co.uk/showthrea...-Recovery-film

    https://www.satpimps.co.uk/showthrea...em-with-6000HD

    https://www.satpimps.co.uk/showthrea...ery-check-this

    https://www.satpimps.co.uk/showthrea...for-hard-reset
    Attached Files Attached Files

  2. The Following 35 Users Say Thank You to blackdevil For This Useful Post:

    2colby (06-11-2013), Aldo (23-02-2014), atopa (22-10-2015), barryr (06-11-2013), bobina (18-03-2017), Chelseaboy1A (03-12-2013), cremac (06-06-2014), d.nother (14-02-2015), darkgentle (24-07-2015), Davefire (28-06-2014), didial (06-02-2014), Dr. House (15-12-2013), drh (13-04-2014), echelon (05-11-2013), EXTRAFACTO (29-06-2015), fabled (06-11-2013), general Martok (05-11-2013), gerald (09-11-2013), gologica (20-01-2015), hianta (16-01-2014), jameson (21-05-2014), jbvid (12-11-2013), manic01 (07-11-2013), markd (09-12-2016), mwg (07-11-2013), nicknufc (23-01-2018), port06 (06-11-2013), reefer345 (25-09-2015), Roadrunner (05-11-2013), sat-nav (21-04-2019), sattvfan (21-01-2022), THETIGERSHULL (05-02-2014), vladimir12 (20-09-2015), Weston Calling (06-11-2015), williamtell (04-02-2015)

Similar Threads

  1. 2100 plus instructions
    By avigliano in forum Clarke Tech
    Replies: 3
    Last Post: 19-04-2008, 09:56 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •