Keys attached.
Key Formats Modified By kargo25 and Informed®™
THX TO STarTIMES BISS TEAM
Keys attached.
Key Formats Modified By kargo25 and Informed®™
THX TO STarTIMES BISS TEAM
Keys is good mate.
Make sure pids have scanned ok.
Make sure no freq the same as spider is funny with biss.
echelon (17-02-2013)
Incorrect info, sorry.
Last edited by manic01; 17-02-2013 at 02:11 PM.
that method is for when different keys are used but the channels are on the same transponder
these bbc and itv channels etc are all on one transponder with one key for all of them (same key)
tested fox sports on 30w and biss key works ok, as does mgm me on 10e too
still blank on 27.5w although signal and quality all good
edit , scanned pids are incorrect
You have pids ok mate?
no m8
scanned pids are different
if I try manual pid entry its numbers only, no letters allowed so cannot input the actual pids to scan manually on my spiderbox
I still think its either a symbol rate issue or down to this pid entry being digits only, no hex letters allowed
I also tried a few other biss channels from the post by mdt and all worked ok , like 10e and 8w and 30w
I have also checked the info with k o s and lyng sat and they show different details which correspond with my scanned channels and pids
like V not H and dvb-s2 etc
27.5°W Intelsat 907 11495.00 V 64 West DVB-S2 QPSK 44100 9/10
my scanned pids are the same as those listed on K O S too with good signal and good quality levels
hello,
before the new key change,had tried for weeks on spiderbox 9000hd but couldnt get the channels to clear.
tried next with vu solo,worked for a couple of weeks and then stopped clearing the channels . read that the technomate 5402hd ci
was the easiest receiver to set up for this package,so i bought one.works perfectly,living in tenerife and can view this package
with a 1 metre dish.
manic01 (27-02-2013)
This will end up the same as PLTV!! to much about it on the net.
Barney (27-02-2013)
Thats life mate.
Buls*t lasting for many years so not always true.
Hi
Reviving this thread with a simple query. I'm not exactly at ease in the matter but I'm running both cccam 2.30 and mgcamd 1.38 in my Solo2. I have the first connected most of the time and it clears fox sports hd at 30şW anytime but if I move to 27.5şW, I need to start the latter in order to view what's there. Can someone please tell why this happens ??
Thanks
no one seems to know the answer to that question bud
the keys work fine in mgcamd but not in cccam,they also work fine in oscam y mod but not in the normal oscam when all other biss keys work without issue.
its just strange.
Ian.
kota (09-05-2013)
Not strange matey..Cccam no longer opens b*lsat or csat with keys either,only mgcamd & oscamymod..I assume its because cccam hasnt been supported in years so it wont tackle the latest keys.
these channels are not clearing today.... looks like a key change although maybe a change in the stream as they have updated something,regards mdt
kota (17-05-2013)
kota (18-05-2013)
Key still works 100% no change with biss key yet .
Change in PMT i had to manually Add channels and all sperate Pids on my Tm5402 M2 HD then add Biss key 8280 for every channel now all works just fine again .
---
Barney
Still clears as stated on TM5402, no need to scan or change pids.
Bookmarks