Results 1 to 1 of 1

Thread: FAQ for tm5402s HD box

  1. #1
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts

    FAQ for tm5402s HD box

    Phantompatch-TM5402HDCI_ALL
    --------------------------------------------------------------------------------

    epg has changed
    when in epg press info and the more day guide will come up
    now when you exit and goto other channel and go into epg the more day guide is still there
    press info again and it's back to normal

    for who can use the 7 day epg on astra 28.2 east channels like the 6000+7000 super series +5402

    scan transponder 11.778 V 27.500

    any tv channel on this transponder will load the 7day-epg on your stb ,
    go into epg mode on one of those channels and within a minute the epg will populate on almost all channels.
    (leave for a few minutes to get full list)
    make sure you stay in epg mode and you can press info to see progress

    use TMsoftcam for ucas channels on TM-5402HD, use k**s from TechnomateMaker

    previous instructions

    Fixed.
    1-new c/s
    2-new default channel list
    3-Timer Recording event and stand by fixed
    4-NTSC ok now when radio and internet radio selected
    5-now and next fixed
    6-Blind scan fixed
    7-Default audio high


    previous patch instructions

    1-7days EPG (28e UK)
    a- turn on a stb
    b- move to 11778 V 27500 on Astra2
    c- wait for a minute
    d- move to other channels
    =========================
    2-DD+ no sound
    3-Can***** updating
    4-TNTsat updating
    5-BisTV updating
    6-Neotion cam updating

    enter pin 0000 or from normal viewing TV screen enter 8281 to access ser*** list

    this box uses the same setup details and channel lists as the tm6900 HD box and also the blade BM7000S HD box too

    ================================= =========================

    tm5402 guides etc

    use 8281 to access the hidden menu

    this is a guide some kind soul posted on another forum, thank you

    you will have to obtain your own server for this , do not ask for one on this forum !! its against the rules to ask

    open the cfg file with notepad and you will see a c-line in it ( hostname - port , userID - password
    you enter the c-line into your tm like
    example c-line C: www.c-line.no-ip 22000 FOX1234 test2 no

    break the c-line up in 4 pieces at the spaces between the words and numbers
    do not put this in the tm because it will not get connected
    always miss this > C: > no
    example, they like(goto your server menu press 8281 while watching a channel)

    Protocol CCCAM

    Timeout: 3Sec

    3) ID: FOX1234

    4) Password: test2

    1) Address: _www.c-line.no-ip

    2) PORT: 22000

    if it's a n-line you will have to use newcamd as your protocol

    if you don't have the server menu in your tm you have to install latest patch and latest add on

    -----------------------------------------------------------------------------

    24/7 epg help

    here are the instructions exactly as from a Phantom patch update:

    1-7days EPG (28e UK)
    a- turn on a stb
    b- move to 11778 on Astra2
    c- wait for a minute
    d- move to other channels

    And here's just a bit more information from another site which is in relation to an official Sly receiver but should help you out with doing a manual scan:
    When a Sly digital receiver is first switched on it will look for the "Default Transponder".
    This is transponder 4, frequency 11.778 Vertical polarisation, Symbol Rate 27.5. FEC 2/3.
    This is where Sly's Electronic Programme Guide or EPG is situated.

  2. The Following 10 Users Say Thank You to echelon For This Useful Post:

    bas83 (12-12-2013), Chazz (09-02-2014), PAULF (14-11-2013), pbpauljo (06-09-2015), pmach10 (17-10-2013), port06 (13-01-2013), railroad (15-01-2013), rei565 (24-09-2013), supergab (28-01-2014), williamtell (07-09-2013)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •