XP COM PORT SETUP
go to start ,go to my computer right click and go to properties
go to hardware tab **** device manager go to ports ( COM & LPT )
click on the little + sign and find com port 1 or what ever com port number it says , remember the number Communications Port
click on it to highlight it then right click it go to properties then look for port setting tab on top
click that i there you will see
bits per second set this to ======= 115200
data bits ========= 8
parity ============ None
stop bits ========= 1
flow control ====== None
then go to advance button and press ok
next setting in there is
tick the top option MAKE SURE THIS IS TICKED
receiver buffer ======== High (14)
Transmit buffer ======== High (16)
com port number use the tab on the side and change it to 1 if it says in use ignore it and force it to use this
MAKE SURE WHEN YOU DO THESE SETTING YOU PRESS OK ON THE RIGHT TO SAVE ON FIRST BOX
THEN OK ON THE NEXT BOX AS WELL THIS MUST BE DONE
THEN GO BACK INTO THE DEVICE MANAGER AND CHECK YOUR SETTING TO MAKE SURE THEY ARE CORRECT
Bookmarks